Airbag control unit with part number 95910-AT000

What does the airbag control unit 95910-AT000 do?

The 95910-AT000 is the control unit of the restraint system (SRS) of Kia. It continuously checks the crash sensors, determines within milliseconds in an accident which airbags and seatbelt pretensioners are triggered, and reports faults via the airbag warning light.

The evaluation depends on the type and strength of the impact. Monitoring the ignition circuits is also one of the unit's tasks.

After an accident, the unit stores crash data and locks itself.

Why does the control unit 95910-AT000 fail?

Stored crash data is the most common cause in the 95910-AT000, even if no airbag has triggered; an ordinary diagnostic tool does not remove it. Added to this are aged components, cold solder joints, moisture and corrosion on plug connections, and voltage spikes, for example with a weak battery or when jump-starting.

The crash data record what was measured at the moment of impact and stay stored, even if the vehicle then appears normal.

The other causes develop step by step. Ageing and moisture affect the plug connections until the contact becomes poorer.

How can you tell that the 95910-AT000 is defective?

The airbag warning light in the instrument cluster lights up on the 95910-AT000 permanently or intermittently in the event of a defect. Error messages in the instrument cluster, the diagnostic tool being unable to reach the control unit, or a fault memory that cannot be cleared also appear. In an emergency, airbags and seatbelt pretensioners may then not trigger.

The light is the system's direct indication of a fault. It does not name the component affected.

Record a message before you reset anything, so the course remains traceable.

Which vehicles is the 95910-AT000 fitted in?

Our assignment for Kia covers this control unit. The 95910-AT000 is fitted in these vehicles: Kia Niro SG2 (from 2022).

Here are the vehicles for this part number:

• Kia Niro SG2 (from 2022)

Compare the number on the label of the removed control unit with this page to confirm you have the right unit. Also have the fault memory read out before removing the unit. Only the log shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-Q4000, Q4959-10000.

How does the repair of the 95910-AT000 work?

First have the fault memory read out and enclose the log. Then disconnect the battery, remove the 95910-AT000 and create a repair order online. Send in the well-packed unit.

Airbag24 checks the unit on the test bench, replaces defective components and deletes stored crash data. Processing at Airbag24 takes 3–4 working days for the 95910-AT000 and covers only checking, repairing and testing.

Afterwards your own unit comes back to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-AT000 get to Airbag24?

You send the 95910-AT000 as a parcel or book a UPS collection for an extra charge. The return after the repair is made by UPS.

The printed repair order goes into the parcel, and you pack the unit shock-proof.