Airbag control unit with part number 95910-AT110

What does the airbag control unit 95910-AT110 do?

The airbag control unit 95910-AT110 controls the SRS restraint system of Kia. It processes the signals from the crash sensors and, in an accident, decides within the shortest time which airbags and seatbelt pretensioners deploy. After an accident it stores crash data and locks itself; this lock is lifted by the repair.

The unit checks the system continuously, and faults appear via the airbag warning light in the instrument cluster.

Without a working control unit the restraint system cannot work as intended in an emergency.

Why does the control unit 95910-AT110 fail?

Stored crash data is the most common cause, even when no airbag has deployed. A normal diagnostic tool cannot erase it; Airbag24 erases it during the repair.

Other causes are also possible:

• aged electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery or a jump start

Fault finding shows in each case which cause applies.

How can you tell that the 95910-AT110 is defective?

A defect shows up as the airbag warning light in the instrument cluster lighting up permanently or intermittently, and as an error message in the instrument cluster. The diagnostic tool gets no connection to the control unit, and the fault memory cannot be cleared.

In such a case airbags and seatbelt pretensioners may possibly not deploy in an emergency.

Cables and plugs can cause the same symptoms, which is why checking the fault memory is important.

Which vehicles is the 95910-AT110 fitted in?

The control unit 95910-AT110 is fitted in these vehicles: Kia Niro SG2 (from 2022).

You will find an overview of the vehicles for this part number here.

• Kia Niro SG2 (from 2022)

Compare the part number on the label of the removed unit with this page. That ensures it is the right unit. Have the fault memory read out beforehand, because only this result shows whether the control unit is defective or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-Q4000, Q4959-10000.

How does the repair of the 95910-AT110 work?

Processing at Airbag24 generally takes 3–4 working days. After checking, repair and function test, your own unit is returned to you.

Beforehand you have the fault memory read out, disconnect the battery and only then remove the control unit. Afterwards you create a repair order online and send the unit well packed.

Airbag24 checks it on the test bench, repairs defective components, erases stored crash data and carries out a function test. Afterwards your own unit is returned to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-AT110 get to Airbag24?

The unit goes to Airbag24 by parcel, or with a UPS collection that you book for an extra charge. After the repair Airbag24 returns it by UPS.

You put the printed repair order into the parcel and pack the unit shockproof.