Airbag control unit with part number 95910-B1700

What does the airbag control unit 95910-B1700 do?

The airbag control unit 95910-B1700 is the central component of the restraint system (SRS) for Hyundai. It evaluates signals from the crash sensors, selects the airbags and seatbelt pretensioners to trigger in an accident and decides within milliseconds. If it detects a fault in the system, it reports it via the airbag warning light.

Monitoring runs permanently, even without driving. After a crash, the control unit secures crash data and locks itself, and this lock only ends with the repair.

For occupant protection, the unit is therefore indispensable.

Why does the control unit 95910-B1700 fail?

Most often the cause is crash data stored after an accident, even if no airbag deployed; a normal diagnostic tool cannot erase it. Other causes include aged components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

The crash data remains in memory until someone specifically erases it. The remaining causes concern electronics and contacts.

Only the examination decides, in an individual case, which cause applies.

How can you tell that the 95910-B1700 is defective?

If the airbag warning light in the instrument cluster lights up permanently or intermittently, there is a finding. A fault message in the instrument cluster and a diagnostic tool that cannot make contact also point to it. In an emergency, airbags and seatbelt pretensioners may then not deploy.

The light is the indication you should not overlook. Have the vehicle checked promptly if you find a fault.

A fault memory that cannot be cleared also belongs in this check.

Which vehicles is the 95910-B1700 fitted in?

Comparing with your vehicle papers clarifies whether your car is meant. The control unit 95910-B1700 is fitted in these vehicles: Hyundai Genesis DH (2014-2017).

Our assignment for this part number yields the following vehicles:

• Hyundai Genesis DH (2014-2017)

Comparing the part number on the label with this page ensures that you have removed the correct unit, but it does nothing more. Whether the unit is defective is clarified only by the fault memory, which you should have read out beforehand, because it also shows whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-B1000, 95910-B1100, 95910-B1200, 95910-B1250, 95910-B1500, 95910-B1800.

How does the repair of the 95910-B1700 work?

You start with reading out the fault memory and enclosing the log. Then disconnect the battery and remove the control unit 95910-B1700. Online, you then create the repair order and send the well-packed unit. Processing at Airbag24 usually takes 3–4 working days.

In the next step, Airbag24 checks the unit on the test bench, replaces defective components, erases stored crash data and carries out a functional test.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-B1700 get to Airbag24?

You send the control unit 95910-B1700 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns it to you by UPS.

Put the printed repair order into the parcel. Pack the unit shockproof before it is on its way.