Airbag control unit with part number 95910-B2100

What does the airbag control unit 95910-B2100 do?

The airbag control unit 95910-B2100 controls the restraint system (SRS) for Kia. It evaluates the crash sensors and decides in an accident, within milliseconds, which airbags and seatbelt pretensioners are triggered.

The unit checks the system constantly for faults, which it reports via the airbag warning light. If an accident has occurred, it stores the crash data and locks itself.

Only the repair lifts the lock.

Why does the control unit 95910-B2100 fail?

The most common cause for the 95910-B2100 is crash data stored after an accident, even if no airbag has deployed. Other causes are aged electronics, solder joints, moisture and voltage spikes.

Crash data remains in the memory if you work only with a standard diagnostic tool. During the repair at Airbag24, it is deleted.

• Aged electronic components
• Cold solder joints
• Moisture and corrosion at plug connections
• Voltage spikes, for example with a weak battery or a jump start

Which cause applies in the individual case is only shown by the examination at Airbag24.

How can you tell that the 95910-B2100 is defective?

A defect in the 95910-B2100 shows itself at the airbag warning light in the instrument cluster and in fault messages. These signs stand out:

• The airbag warning light lights up permanently or intermittently
• A fault message in the instrument cluster
• The diagnostic tool finds no connection to the control unit
• The fault memory cannot be cleared

With such a defect, airbags and seatbelt pretensioners may possibly not deploy in an emergency. The warning light is therefore a sign you should not ignore.

Which vehicles is the 95910-B2100 fitted in?

The airbag control unit 95910-B2100 is fitted in these vehicles: Kia Soul PS (2014-2019).

These vehicles are recorded in our assignment for this part number:

• Kia Soul PS (2014-2019)

Comparing the part number on the removed unit with this page only confirms that it is the correct unit. It does not establish whether the unit is defective. Have the fault memory read out beforehand, because only this record shows whether the control unit or a connector or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 959102K000, 959102K050, 95910B2010, 95910B2050, 95910B2600.

How does the repair of the 95910-B2100 work?

First have the fault memory of the 95910-B2100 read out and enclose the log, then disconnect the battery and afterwards remove the unit. Then create a repair order online and send the unit in well packed. Airbag24 needs 3–4 working days for checking, repairing and testing.

Airbag24 checks the unit on the test bench, replaces defective components, deletes the stored crash data and carries out a function test. Afterwards, the unit goes back to you.

The 3–4 working days refer solely to checking, repairing and testing at Airbag24.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-B2100 get to Airbag24?

You send the control unit 95910-B2100 to Airbag24 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns the unit to you by UPS.

The printed repair order goes in the parcel, together with shock-proof packaging.