Airbag control unit with part number 95910-B2250

What does the airbag control unit 95910-B2250 do?

The airbag control unit 95910-B2250 controls the SRS restraint system of Kia. It evaluates the signals from the crash sensors and determines in an accident which airbags and seatbelt pretensioners are triggered.

It also takes over the monitoring of the system. It indicates faults with the airbag warning light in the instrument cluster.

Crash data from an accident is stored in the unit, and afterwards the unit is locked.

Why does the control unit 95910-B2250 fail?

Most often the cause lies in stored crash data, even if no airbag was triggered. Other triggers are aged electronics, cold solder joints, moisture and corrosion on contacts, and voltage spikes.

Such data cannot be removed with the usual diagnostic tool. Airbag24 takes care of the deletion during the repair.

Aged components, cold solder joints and moisture on contacts can also cause faults. Voltage spikes, for example from a weak battery or a jump start, also belong to the causes.

How can you tell that the 95910-B2250 is defective?

A defect shows itself through an airbag warning light that stays on constantly or only now and then, through an error message in the instrument cluster, through a diagnostic tool without a connection to the control unit, and through a fault memory that cannot be cleared.

In that case there is a possibility that airbags and seatbelt pretensioners do not trigger in an emergency.

You should therefore have such warning signals clarified promptly.

Which vehicles is the 95910-B2250 fitted in?

The control unit 95910-B2250 from Kia is fitted in these vehicles: Kia Soul PS (2014-2019).

The overview below lists the vehicles stored for this part number.

• Kia Soul PS (2014-2019)

A comparison of the part number with the label on the removed unit only confirms that it is the right unit. Have the fault memory read out in advance, because only this result shows whether the control unit itself is defective or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 959102K000, 959102K050, 95910B2010, 95910B2050, 95910B2600.

How does the repair of the 95910-B2250 work?

First have the fault memory read out and attach the log, then disconnect the battery and remove the control unit 95910-B2250. Afterwards create a repair order online and send the unit well packed. Processing at Airbag24 takes 3–4 working days as a rule.

Airbag24 checks the control unit on the test bench, repairs defective components, removes the crash data and finally carries out a function test. Then your own unit comes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-B2250 get to Airbag24?

You either send the control unit 95910-B2250 as a parcel, or you book a UPS collection for an extra charge. Airbag24 then sends the repaired unit back by UPS.

Enclose the printed repair order and pack the control unit shock-proof.