Airbag control unit with part number 95910-B2350

What does the airbag control unit 95910-B2350 do?

In the restraint system (SRS) of Kia, the airbag control unit 95910-B2350 processes the signals from the crash sensors. If the evaluation results in a deployment in a crash, it controls airbags and seatbelt pretensioners within milliseconds.

The system is monitored constantly during operation, and faults appear on the airbag warning light. After an accident, the unit stores crash data and locks itself.

Why does the control unit 95910-B2350 fail?

The most common cause is crash data stored after an accident, even if no airbag was triggered. Ageing electronic damage, cold solder joints, moisture and corrosion on plugs, and voltage peaks are also possible causes.

Crash data remains stored in the unit, because a standard diagnostic tool cannot remove it. The other causes develop over a longer period: components age, solder joints fatigue, and moisture attacks the contacts.

Voltage peaks, for example from a weak battery or from jump-starting, are an additional strain. Only the test shows which of these causes applies to the unit.

How can you tell that the 95910-B2350 is defective?

The control unit 95910-B2350 signals a defect via the airbag warning light in the instrument cluster, when it lights up permanently or intermittently. Fault messages in the instrument cluster, no connection to the diagnostic tool and a fault memory that cannot be cleared also indicate a defect. In an emergency, airbags and seatbelt pretensioners may then fail to trigger.

The warning light is the early warning that the system gives as soon as it detects a fault. Do not ignore it.

Which vehicles is the 95910-B2350 fitted in?

The 95910-B2350 is fitted in these vehicles: Kia Soul PS (2014-2019).

This compilation lists the vehicles for the part number:

• Kia Soul PS (2014-2019)

Check the part number on the label of the removed unit against this page. This only establishes that you have the right unit in front of you. Whether the control unit is defective or a plug or cable is the cause will only be shown by the fault memory read out beforehand.

For the same vehicles, we also repair control units with the part numbers 959102K000, 959102K050, 95910B2010, 95910B2050, 95910B2600.

How does the repair of the 95910-B2350 work?

First have the fault memory read out and enclose the log with the unit. Then disconnect the battery, and only afterwards remove the control unit 95910-B2350 and create a repair order online. Airbag24 then checks the unit, replaces defective components, erases crash data and tests the function.

Pack the unit well and send it in. After the functional test, it is returned to you.

For checking, repairing and testing at Airbag24, allow 3–4 working days as a rule.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-B2350 get to Airbag24?

You send the unit as a parcel or, for an extra charge, have it collected by UPS. Airbag24 sends it back to you by UPS after the repair.

The printed repair order goes into the parcel, and the unit must be packed shockproof.