Airbag control unit with part number 95910-B2400

What does the airbag control unit 95910-B2400 do?

The airbag control unit 95910-B2400 is the central component of the restraint system in Kia. It evaluates the crash sensors, decides in an accident within milliseconds about airbags and seatbelt pretensioners, and monitors the system. It indicates faults via the airbag warning light. After an accident it stores crash data and locks itself.

The crash sensors continuously supply measured values, and the control unit makes the decision on deployment from this data. The entire protective function depends on this evaluation.

Anyone who watches the warning light notices deviations early, because the unit reports them in the instrument cluster.

Why does the control unit 95910-B2400 fail?

Most often the cause is crash data stored after an accident, even without an airbag having deployed. These cannot be removed with a normal diagnostic tool.

Aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes can also trigger the failure. A fault can occur together with others, which is why the unit is examined thoroughly during repair.

Airbag24 deletes the stored crash data in the course of the repair. You do not have to carry out this step yourself.

How can you tell that the 95910-B2400 is defective?

Typical signs are the airbag warning light, which stays on permanently or intermittently, and a fault message in the instrument cluster. A missing connection to the diagnostic tool or a fault memory that cannot be cleared also point to the problem. Airbags and seatbelt pretensioners may then fail to deploy in an emergency.

• Airbag warning light stays on permanently or intermittently
• Fault message in the instrument cluster
• Diagnostic tool cannot reach the control unit
• Fault memory cannot be cleared

Whether the control unit is really defective is determined only by a check. Cables and plugs cause similar symptoms.

Which vehicles is the 95910-B2400 fitted in?

The control unit 95910-B2400 is fitted in these vehicles: Kia Soul PS (2014-2019).

The following list shows the vehicles that Airbag24 assigns to this unit.

• Kia Soul PS (2014-2019)

Read out the fault memory before removal and then compare the part number on the label with the information in this list. That way you know for certain that you are sending in the right unit.

For the same vehicles, we also repair control units with the part numbers 959102K000, 959102K050, 95910B2010, 95910B2050, 95910B2600.

How does the repair of the 95910-B2400 work?

Processing at Airbag24 generally takes 3–4 working days for checking, repairing and testing. Beforehand, you read out the fault memory, enclose the log, disconnect the battery, remove the control unit and create a repair order online.

Pack the removed unit carefully before sending it. A sturdy box with filling material protects the electronics.

Airbag24 checks the unit on the test bench, repairs defective components, deletes stored crash data and carries out a function test. Your own unit then goes back to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-B2400 get to Airbag24?

You can send the control unit 95910-B2400 as a parcel or book a UPS collection for an extra charge. After the repair, UPS brings the unit back to you.

Put the printed repair order into the parcel and pack the unit shock-proof.