Airbag control unit with part number 95910-B8600

What does the airbag control unit 95910-B8600 do?

The airbag control unit 95910-B8600 is the central control unit of the SRS for Hyundai. It processes the signals of the crash sensors and decides on airbags and seatbelt pretensioners in an accident within milliseconds.

Monitoring runs constantly. Faults appear via the airbag warning light in the instrument cluster.

After an accident the unit stores crash data and locks itself.

Why does the control unit 95910-B8600 fail?

The most common cause with 95910-B8600 is crash data stored after an accident, even if no airbag was triggered. Ageing electronic components, cold solder joints, moisture and corrosion as well as voltage spikes can also lead to failure.

Crash data cannot be erased with a standard diagnostic tool. Airbag24 erases it during the repair.

Further causes at a glance:

• Ageing electronic components
• Cold solder joints
• Moisture and corrosion on plugs
• Voltage spikes, for example from a weak battery or a jump start

How can you tell that the 95910-B8600 is defective?

On the 95910-B8600 the airbag warning light lights permanently or intermittently. An error message in the instrument cluster appears too, the diagnostic tool finds no connection to the control unit, and the fault memory cannot be cleared. In an emergency, airbags and seatbelt pretensioners may then not trigger.

• Warning light in the instrument cluster lights permanently or intermittently
• Error message in the instrument cluster
• No connection between diagnostic tool and control unit
• Fault memory cannot be cleared

If such signs occur, get clarity promptly by reading out the fault memory.

Which vehicles is the 95910-B8600 fitted in?

The airbag control unit 95910-B8600 is intended for Hyundai and fitted in these vehicles: Hyundai Santa Fe DM (2012-2015) and DM Facelift (2015-2018).

The list of models follows below:

• Hyundai Santa Fe DM (2012-2015)
• Hyundai Santa Fe DM Facelift (2015-2018)

Comparing the part number on the label with this page ensures that you remove the correct unit. Whether the unit is defective or a plug or cable causes the fault is shown only by reading out the fault memory before removal.

For the same vehicles, we also repair control units with the part numbers 95700-2B110, 95910-0W100, 95910-26100, 95910-2B028, 95910-2B900, 95910-2B970.

How does the repair of the 95910-B8600 work?

First have the fault memory read out and enclose the log. Then disconnect the battery and remove the control unit 95910-B8600. Processing at Airbag24 usually takes 3–4 working days for checking, repairing and testing.

Create a repair order online and send the unit in well packed.

Airbag24 checks the unit on the test bench, replaces defective components when needed, erases stored crash data and carries out a functional test.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-B8600 get to Airbag24?

The control unit 95910-B8600 reaches Airbag24 either by parcel or via a UPS collection that you book for an extra charge. After the repair Airbag24 brings it back to you by UPS.

Enclose the printed repair order in the parcel. The unit is packed shockproof.