Airbag control unit with part number 95910-B8960

What does the airbag control unit 95910-B8960 do?

The airbag control unit 95910-B8960 controls the restraint system (SRS) of Hyundai. It captures the crash sensors, decides within milliseconds in an accident which airbags and seatbelt pretensioners fire, and monitors the system continuously.

If the unit detects a fault, it switches on the airbag warning light in the instrument cluster. This is how a fault can be noticed early.

After an accident, it stores crash data and locks itself. This is a feature of the control unit.

Why does the control unit 95910-B8960 fail?

It most often fails because crash data was stored after an accident, even if no airbag has deployed. A normal diagnostic tool cannot delete this data. Other causes also occur.

• ageing electronic components
• cold solder joints
• moisture and corrosion at the plug connections
• voltage spikes, for example from a weak battery or jump-starting

Which cause applies in an individual case is clarified by the examination of the unit. Airbag24 removes stored crash data during the repair.

How can you tell that the 95910-B8960 is defective?

A defect shows itself through an airbag warning light that stays on permanently or intermittently, through a fault message in the instrument cluster, and through a diagnostic tool without a connection to the control unit. If the fault memory cannot be cleared, that is also a clear sign.

In an emergency, airbags and seatbelt pretensioners may then fail to deploy. A finding like this therefore belongs in a quick check, not left waiting in a queue.

Which vehicles is the 95910-B8960 fitted in?

The 95910-B8960 is fitted in these vehicles: Hyundai Santa Fe DM (2012-2015) and DM Facelift (2015-2018).

The following vehicles are recorded for this part number:

• Hyundai Santa Fe DM (2012-2015)
• Hyundai Santa Fe DM Facelift (2015-2018)

Have the fault memory read out before the control unit is removed. That shows whether the control unit itself is defective or whether a plug or cable triggers the fault. Then compare the part number on the label of the unit with this page.

For the same vehicles, we also repair control units with the part numbers 95700-2B110, 95910-0W100, 95910-26100, 95910-2B028, 95910-2B900, 95910-2B970.

How does the repair of the 95910-B8960 work?

Processing at Airbag24 usually takes 3–4 working days. It covers checking, repairing and testing the unit.

Before removal, enclose the fault memory log. Then disconnect the battery, remove the control unit, create the repair order online and pack the unit well for dispatch.

At Airbag24, the unit first goes onto the test bench. Defective components are replaced by the workshop, crash data is deleted, and a function test completes the work. The unit then goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-B8960 get to Airbag24?

You send the unit as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns the control unit by UPS.

The printed repair order belongs in the parcel, and the unit should be packed shock-resistant.