Airbag control unit with part number 95910-BF000

What does the airbag control unit 95910-BF000 do?

The airbag control unit 95910-BF000 is the central control unit of the restraint system of Hyundai. It measures via the crash sensors whether an accident has occurred and, if required, triggers airbags and seatbelt pretensioners within milliseconds. It monitors the system continuously in doing so.

The fault messages appear via the airbag warning light in the instrument cluster.

After an accident, the unit stores crash data and locks itself. The lock is only released by the repair.

Why does the control unit 95910-BF000 fail?

Stored crash data is the most common cause, even if no airbag was triggered; a normal diagnostic tool cannot erase it. Aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes, for example from a weak battery or a jump start, can also cause the failure.

Stored crash data stays in the control unit until it is removed. As long as this does not happen, the entry also remains in the fault memory.

The other causes are more likely to result from ageing and environmental influences. Moisture attacks contacts, and voltage spikes can stress the electronics.

How can you tell that the 95910-BF000 is defective?

A defect shows up through an airbag warning light that lights up permanently or intermittently. In addition, a fault message appears in the instrument cluster, and the diagnostic tool cannot establish a connection to the control unit. The fault memory also cannot be cleared.

In an emergency, the airbags and seatbelt pretensioners may then fail to trigger. The warning light indicates the defect and requires a check.

A check starts with reading out the fault memory, which provides information about the cause.

Which vehicles is the 95910-BF000 fitted in?

The airbag control unit 95910-BF000 is fitted in these vehicles: Hyundai Kona SX2 (from 2023).

The following vehicles are assigned to this part:

• Hyundai Kona SX2 (from 2023)

Comparing the part number on the label with this page ensures that you have removed the right unit. The actual cause is determined only by the fault memory, which you read out beforehand.

For the same vehicles, we also repair control units with the part numbers 95910-17600, 95910-J9100.

How does the repair of the 95910-BF000 work?

Processing at Airbag24 usually takes 3–4 working days. First, have the fault memory read out, enclose the log, disconnect the battery and only then remove the control unit.

Then create a repair order online and send in the well-packed unit. Airbag24 checks the unit on the test bench, repairs defective components, erases the crash data and carries out a function test. The unit then goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-BF000 get to Airbag24?

You send the unit to Airbag24 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns it to you by UPS.

Enclose the printed repair order with the unit and pack it shockproof.