Airbag control unit with part number 95910-BF200

What does the airbag control unit 95910-BF200 do?

The airbag control unit 95910-BF200 coordinates the restraint system (SRS) for Hyundai. It reads the crash sensors, selects in an accident the airbags and seatbelt pretensioners that are to trigger, and monitors the entire system.

If it detects a fault, it shows this via the airbag warning light in the instrument cluster. This is how the fault becomes visible to the driver.

After an accident it creates crash data and locks itself. This is a fixed feature of the system.

Why does the control unit 95910-BF200 fail?

Crash data stored after an accident is the most common cause on the 95910-BF200, even if no airbag has deployed. A normal diagnostic tool cannot erase it. Aged components, cold solder joints, moisture, corrosion at plug connections and voltage spikes are also possible causes.

Airbag24 deletes the crash data during the repair; this is part of the process.

Over time electronic components age. Solder joints can go cold, and moisture as well as corrosion at plug connections disturb the contact. Voltage spikes, for example from a weak battery or from a jump start, put additional strain on the electronics.

How can you tell that the 95910-BF200 is defective?

The airbag warning light in the instrument cluster lights up on the 95910-BF200 permanently or intermittently. An error message appears in the instrument cluster, and the diagnostic tool cannot reach the control unit.

In this case the fault memory remains and cannot be cleared. Airbags and seatbelt pretensioners may not trigger in an emergency. A prompt check is therefore advisable.

Which vehicles is the 95910-BF200 fitted in?

The control unit 95910-BF200 is fitted in these vehicles: Hyundai Kona SX2 (from 2023).

The vehicles at a glance:

• Hyundai Kona SX2 (from 2023)

Compare the part number on the label of the removed unit with this page, and you will know that it is the correct one. What the fault is due to is only shown by the fault memory, which you have read out beforehand. It shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-17600, 95910-J9100.

How does the repair of the 95910-BF200 work?

First have the fault memory read out and include the log. Then disconnect the battery and only then remove the control unit 95910-BF200. Next, create a repair order online and send the well-packed unit in. Processing at Airbag24 usually takes 3–4 working days.

At Airbag24 the unit is checked, defective components are repaired, the crash data is deleted and a function test is carried out. After that the unit comes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-BF200 get to Airbag24?

You send the control unit 95910-BF200 as a parcel to Airbag24 or book a UPS collection for an extra charge. After the repair, UPS brings the unit back to you.

Pack the printed repair order with the unit and pack the control unit shockproof.