Airbag control unit with part number 95910-BV310

What does the airbag control unit 95910-BV310 do?

The airbag control unit 95910-BV310 coordinates the restraint system (SRS) of Kia. From the signals of the crash sensors it determines within milliseconds whether airbags and seatbelt pretensioners deploy. If it detects a fault, it indicates this via the airbag warning light.

The control unit monitors the system continuously. After an accident it stores crash data and locks itself.

Why does the control unit 95910-BV310 fail?

Most often the cause is stored crash data, even if no airbag has deployed. Other causes:

• ageing electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery or a jump start

Crash data cannot be erased with a normal diagnostic tool. The fault therefore remains in the memory until the cause has been found.

The other causes often cannot be seen from the outside at plugs and solder joints, which is why the fault memory provides important clues.

How can you tell that the 95910-BV310 is defective?

A defect shows up as the airbag warning light that lights up in the instrument cluster, as error messages, as a missing connection to the diagnostic tool or as a fault memory that cannot be cleared.

In an emergency, airbags and seatbelt pretensioners may not deploy if the control unit has reported a fault. Have the indicator narrowed down promptly.

Which vehicles is the 95910-BV310 fitted in?

The control unit 95910-BV310 is fitted in these vehicles: Kia Seltos SP2 (from 2019).

The allocation to the models can be found here:

• Kia Seltos SP2 (from 2019)

Compare the part number on the label of the removed unit with this page. This ensures that you have the correct unit. Also have the fault memory read out, because only this log shows whether the control unit itself is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 80100-Q5600WK, 80100Q5600, 95910-Q5100-95512.

How does the repair of the 95910-BV310 work?

First have the fault memory read out and enclose the log. Then disconnect the battery and remove the control unit 95910-BV310. Afterwards, create a repair order online and send the well-packed unit in.

Airbag24 checks the unit on the test bench, replaces defective components, deletes stored crash data and carries out a function test. Checking, repairing and testing usually take 3–4 working days.

Your own unit is then returned to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-BV310 get to Airbag24?

You hand in the control unit as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns your own unit to you by UPS.

Put the printed repair order in the parcel and pack the unit so that it is shock-resistant.