Airbag control unit with part number 95910-C1700

What is the function of the airbag control unit 95910-C1700?

The airbag control unit with part number 95910-C1700 is the central control module for the passive safety system in the Hyundai Sonata Y3 (1993–1998). It continuously monitors the vehicle’s sensors, processes their data, and is responsible for deploying the airbags and seatbelt pretensioners in the event of a crash.

As the core component of the restraint system, this module determines within milliseconds whether to activate the safety mechanisms, ensuring optimal protection for occupants.

The control unit is specifically designed for the Hyundai Sonata Y3 series and its facelift version (1996–1998), communicating with all relevant vehicle systems to guarantee safety.

Why does the 95910-C1700 control unit fail?

The most common cause of failure for the 95910-C1700 control unit is the storage of crash data, which permanently locks the device. Other reasons include internal hardware defects in electronic components that lead to complete communication loss, as well as persistent error codes that cannot be cleared.

Following an accident or even minor collisions where the airbags did not deploy, crash data may remain stored in the internal memory. This lockout ensures safety by preventing reuse, but it can be reset through professional repair.

An internal defect on the circuit board is another frequent source of failure. This often manifests when the control unit becomes inaccessible to diagnostic tools, making fault analysis at the workshop impossible.

In some cases, error codes—such as those related to seatbelt pretensioners—are stored in memory and cannot be erased despite intact components. This too indicates an internal malfunction requiring repair.

How do you recognize a defect in the 95910-C1700?

A defective 95910-C1700 airbag control unit primarily shows itself through a constantly illuminated or intermittently flashing airbag warning light on the dashboard. Another clear sign is when the control unit becomes unresponsive to diagnostic equipment, refusing any communication.

The most obvious indication is the active airbag warning light, signaling to the driver that the safety system is not functioning properly and may fail to deploy in an emergency.

A specific symptom unique to this unit is the airbag light illuminating approximately 30 seconds after starting the engine. This behavior strongly suggests a problem within the control module itself.

If the workshop cannot access the airbag control unit using diagnostic equipment to read or clear error codes, this confirms a serious internal defect requiring repair.

In which vehicles is the 95910-C1700 control unit installed?

The airbag control unit with part number 95910-C1700 was specifically developed for the second generation of the Hyundai Sonata. At Airbag24, this control unit is professionally refurbished for models in the Y3 series, including the facelift versions.

Repair services at Airbag24 are available for the following Hyundai models:

Hyundai Sonata Y3 (model years 1993–1996)

Hyundai Sonata Y3 Facelift (model years 1996–1998)

How is the 95910-C1700 professionally repaired?

At Airbag24, repairing the 95910-C1700 begins with a thorough incoming inspection to diagnose the issue. Stored crash data is then erased, defective components on the circuit board are replaced, and full communication is restored. A final functional test and a 12-month warranty ensure quality.

After sending the unit to Airbag24, it undergoes a detailed analysis to pinpoint the exact cause of the fault and determine the scope of repairs needed.

The core of the refurbishment involves carefully erasing crash data from the internal memory and replacing faulty electronic components, thereby restoring the device’s original functionality and returning it fully operational.

Following repair, the control unit is tested on a bench to verify proper operation and flawless communication. Airbag24 provides a 12-month warranty on the completed repair.

What shipping options does Airbag24 offer?

To ensure hassle-free processing, Airbag24 offers flexible shipping options. You can send your control unit free of charge or arrange UPS pickup. Returns are also free via standard UPS, with express and cash-on-delivery options available.

For the return shipment, you have several options: drop off the package yourself, bring it in person, or use UPS’s convenient pick-up service from an address of your choice.

Upon successful repair, your control unit will be returned to you free of charge via UPS Standard by default.

For faster delivery, you can opt for UPS Express shipping. Both Standard and Express shipping can optionally be combined with cash-on-delivery. Self-collection at our workshop is also available.