Airbag control unit with part number 95910-C5410

What does the airbag control unit 95910-C5410 do?

The airbag control unit 95910-C5410 controls the airbags and seatbelt pretensioners of Kia as an SRS control unit. It evaluates the crash sensors, selects which deployments to trigger within milliseconds in the event of a crash, and monitors the system continuously. It indicates faults via the airbag warning light.

After a crash, the unit stores crash data and locks itself. This happens in addition to the ongoing monitoring.

Why does the control unit 95910-C5410 fail?

In the control unit 95910-C5410, the most common cause is stored crash data after an accident, even if no airbag has deployed, and a normal diagnostic tool cannot erase it. Other possible causes are aged components, cold solder joints, moisture and corrosion, and voltage spikes.

Crash data is created when the unit registers an accident. Whether an airbag was triggered is irrelevant for this entry.

Further causes include aged electronic components and cold solder joints. In addition, moisture and corrosion at plug connections and voltage spikes, which occur with a weak battery or when jump-starting, come into consideration.

How can you tell that the 95910-C5410 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently when there is a fault in the control unit 95910-C5410. The diagnostic tool cannot find the control unit, and the fault memory cannot be cleared.

An error message also appears in the instrument cluster. In an emergency, airbags and seatbelt pretensioners may then fail to deploy.

If you notice these signs, have the system checked promptly.

Which vehicles is the 95910-C5410 fitted in?

This control unit is used in several vehicles. The airbag control unit 95910-C5410 is fitted in these vehicles: Kia Sorento UM (2014-2020).

The vehicles for which this part number is recorded at Airbag24 are listed below.

• Kia Sorento UM (2014-2020)

Comparing the part number on the label of the removed unit with this page only confirms that it is the correct unit. The fault memory is more important: it shows whether the control unit is defective or whether a plug or cable is the cause. Have it read out beforehand.

How does the repair of the 95910-C5410 work?

Processing at Airbag24 takes 3–4 working days. Before removal, you read out the fault memory and enclose the log, then disconnect the battery and only then remove the control unit 95910-C5410.

Then you create a repair order online and send in the well-packed unit. On the test bench, the unit is inspected, components are repaired where necessary, and the crash data is erased. Finally, a function test follows before your own unit is returned to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-C5410 get to Airbag24?

You send the control unit 95910-C5410 as a parcel; alternatively, you can book a UPS collection for an extra charge. After the repair, Airbag24 returns it to you by UPS.

Include the printed repair order in the parcel and pad the unit so it is shock-resistant.