Airbag control unit with part number 95910-C5700

What does the airbag control unit 95910-C5700 do?

The airbag control unit 95910-C5700 is the control unit of the restraint system (SRS) in Kia. It evaluates the crash sensors, decides in an accident on airbags and seatbelt pretensioners, and monitors the system constantly, with faults appearing via the airbag warning light.

While driving, it checks its own components and the connections. If an accident has occurred, it secures the crash data and locks itself.

Why does the control unit 95910-C5700 fail?

The most common cause with the 95910-C5700 is crash data stored after an accident, even if no airbag has triggered. Further influences are aged electronics, moisture at plugs and voltage spikes.

A normal diagnostic tool cannot erase this data. The erasure therefore belongs to the repair.

Besides that, moisture, voltage spikes, for example from a weak battery or a jump-start, and cold solder joints come into consideration. Corrosion at plug connections can also cause a failure.

How can you tell that the 95910-C5700 is defective?

You recognise a defect in the 95910-C5700 by the airbag warning light in the instrument cluster lighting up constantly or intermittently, and by error messages in the instrument cluster.

Further signs are:

• The warning light does not go out.
• The warning light only comes on intermittently.
• The diagnostic tool cannot establish a connection to the control unit.
• The fault memory cannot be erased.

In an emergency, the airbags and seatbelt pretensioners may therefore not trigger. A prompt check is advisable.

Which vehicles is the 95910-C5700 fitted in?

The 95910-C5700 is found in these vehicles: Kia Sorento UM (2014-2020).

This overview shows the assignment:

• Kia Sorento UM (2014-2020)

Comparing the part number on the label of the removed unit with this page only confirms the right unit. Have the fault memory read out beforehand, because it shows whether the control unit is defective or whether a plug or a cable is the cause.

How does the repair of the 95910-C5700 work?

For the 95910-C5700, read out the fault memory and attach the log. Then disconnect the battery and only afterwards remove the control unit. Create a repair order online and send in the unit well packed. Processing and repair at Airbag24 usually take 3–4 working days.

Airbag24 checks the unit on the test bench, repairs defective components, erases the stored crash data and finally carries out a function test. Then your own unit comes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-C5700 get to Airbag24?

You send the 95910-C5700 as a parcel or have it collected by UPS for an extra charge. The return journey after the repair is also handled by UPS.

Pack the unit shock-proof and enclose the printed repair order.