Airbag control unit with part number 95910-C7010

What does the airbag control unit 95910-C7010 do?

The airbag control unit 95910-C7010 manages the restraint system (SRS) of Hyundai. It evaluates the crash sensors and determines in an accident, within milliseconds, which airbags and seatbelt pretensioners are triggered.

The unit permanently monitors the wiring and the components of the system. If it detects a fault, it reports it via the airbag warning light.

After an accident it creates crash data and then locks itself.

Why does the control unit 95910-C7010 fail?

Crash data from an earlier accident is the most common cause for the 95910-C7010, even if no airbag has deployed. Aged electronics, cold solder joints, moisture and corrosion on plugs, and voltage spikes are further causes.

Crash data stays in the memory and does not disappear on its own. Reading it out with a standard diagnostic tool does not change this.

Aged components and cold solder joints lead to contact problems over time. Moisture acts on plug connectors, and corrosion increases there.

Voltage spikes, for example from a weak battery or a jump start, place an additional load on the electronics.

How can you tell that the 95910-C7010 is defective?

A defect in the 95910-C7010 shows itself mainly through the airbag warning light, fault messages in the instrument cluster, a missing connection to the diagnostic tool and a fault memory that cannot be cleared. In an emergency, airbags and seatbelt pretensioners may then not deploy.

The airbag warning light in the instrument cluster lights up permanently or intermittently as soon as the system detects a fault.

A fault message in the instrument cluster and a diagnostic tool without connection to the control unit complete this picture. A fault memory that cannot be emptied even after an attempt to clear it is also a clear indication.

Which vehicles is the 95910-C7010 fitted in?

The airbag control unit 95910-C7010 is fitted in these vehicles: Hyundai i20 GB (2014-2018) and GB Facelift (2018-2020). A comparison of the part number with the label shows whether the unit fits.

This list shows the vehicles stored for the part number.

• Hyundai i20 GB (2014-2018)
• Hyundai i20 GB Facelift (2018-2020)

Firstly: the label comparison is only a check that you have the correct unit. Secondly: have the fault memory read out beforehand, because only this result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 28S5035758S, 28SC046902S, 5WK43928, 95910-1J400, 95910-C8200.

How does the repair of the 95910-C7010 work?

Have the fault memory read out and attach the log, then disconnect the battery. Only then remove the 95910-C7010, create a repair order online and send the unit in well packed.

The order is important, because the control unit may only be removed once the battery has been disconnected. The log belongs in the parcel.

The specialists at Airbag24 examine the unit on the test bench, replace defective components and remove stored crash data. After the function test your own unit is sent back. Processing usually takes 3–4 working days. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-C7010 get to Airbag24?

You send the control unit 95910-C7010 as a parcel or book a UPS collection for an extra charge. Afterwards UPS brings the repaired unit back to you.

Enclose the printed repair order in the parcel and pack the control unit shock-proof.