Airbag control unit with part number 95910-C8100

What is the function of the airbag control unit 95910-C8100?

The airbag control unit with part number 95910-C8100 is the central control module for the occupant protection system in the Hyundai i20 BC series. Manufactured by original equipment supplier Mobis, it processes signals from crash sensors and, in the event of a collision, precisely deploys the airbags and seatbelt pretensioners.

As an original OEM component from Hyundai, it is deeply integrated into the vehicle’s electronics. Technically, the module is based on an SPC560P50 memory type, responsible for storing operational and crash data. Its primary task is to continuously monitor sensor inputs and activate the restraint systems within milliseconds upon detecting a crash.

Why does the control unit 95910-C8100 fail?

The most common cause of failure for the 95910-C8100 is the accumulation of crash data after an accident, which can lock up the device. Additional faults arise from electrical disturbances such as short circuits or undervoltage, as well as physical damage—particularly water ingress from liquids spilled under the seats or damaged wiring.

Another critical source of failure is electrical interference within the vehicle’s onboard network. Defective batteries or alternators can lead to undervoltage or overvoltage conditions that permanently damage the control unit’s sensitive electronics.

Physical impacts, including cable breaks or corrosion caused by water damage, are also frequent causes. The control unit’s location beneath the seats makes it especially vulnerable to liquid intrusion.

These fault patterns also occur with identical or compatible part numbers such as 95910-1J100, 95910-1J400, and 95910-C8200, which are installed in the same vehicle models.

How do you recognize a defect in the 95910-C8100?

A defective 95910-C8100 primarily manifests as a constantly or intermittently illuminated airbag or SRS warning light on the dashboard. Often, communication with diagnostic tools becomes impossible, or the internal error code B1620 is stored, indicating a hardware fault within the control unit.

The most obvious sign is the active warning light, signaling that the entire airbag system has failed. In the event of a crash, the vehicle no longer provides protection through its restraint systems and will fail the mandatory technical inspection (HU).

In the workshop, the defect often shows up when the control unit stops responding to diagnostic requests. It cannot be read out, and stored fault or crash data cannot be erased using standard testers.

A rarer but unmistakable symptom is the loss of the vehicle identification number (FIN/VIN) stored in memory, pointing to a severe internal memory failure.

In which vehicles is the control unit 95910-C8100 installed?

The airbag control unit 95910-C8100 is specifically designed for the third-generation Hyundai i20. At Airbag24, this module is professionally refurbished for the entire BC series, including the facelift model, restoring the vehicle’s full safety functionality.

At Airbag24, we repair the 95910-C8100 control unit for the following Hyundai models:

Hyundai i20 (BC series, model years 2020–2024)

Hyundai i20 Facelift (BC series, from model year 2023 onward)

How is the 95910-C8100 professionally repaired?

After being sent to Airbag24, the control unit undergoes precise electronic analysis. The repair process includes replacing faulty components and erasing crash data. A final functional test ensures the unit operates like new. A 12-month warranty is provided on all repairs.

The repair procedure at Airbag24 begins with a detailed diagnosis at the circuit board level. Using specialized testing equipment, stored errors such as code B1620 and existing crash data are read out, while electronic components are thoroughly inspected.

Subsequently, defective parts are expertly replaced, and any stored crash data blocking the unit is completely removed. Leading repair facilities draw on over 20 years of experience and insights gained from tens of thousands of successful repairs to ensure reliable performance.

Following repair, the control unit undergoes a comprehensive functional test to confirm it has fully regained its original capabilities. In some cases, post-installation, the vehicle’s fault memory must also be cleared.

Important safety note: Work on the airbag system should only be performed by trained professionals. Temporary fixes such as simulators or resistors are life-threatening and may result in the revocation of the vehicle’s operating license.

What shipping options does Airbag24 offer?

Airbag24 provides customers with flexible shipping options. The initial shipment of the defective control unit can be sent at no cost either by returning it yourself or, optionally, via a convenient UPS pickup. For the return shipment, you can choose between free UPS Standard shipping and faster Express or Cash-on-Delivery options.

To send your defective control unit to Airbag24, you have two choices: you can pack it yourself and ship it free of charge, or arrange for a UPS pickup at your preferred location.

After successful repair, the return shipment is provided free of charge by default using UPS Standard (1–3 business days). Alternatively, you can opt for faster services such as UPS Express (1–2 business days) or pay by Cash on Delivery (UPS Standard or Express). Personal pickup is also available.