Airbag control unit with part number 95910-C9300

What does the airbag control unit 95910-C9300 do?

The airbag control unit 95910-C9300 controls the restraint system (SRS) in vehicles from Hyundai. It checks the sensor signals continuously and decides in an impact within milliseconds which airbags and seatbelt pretensioners fire. After an accident it stores crash data and locks itself.

The electronics continuously check whether the restraint system is operational and report faults to the airbag warning light.

The lock ends only with the repair of the unit.

Why does the control unit 95910-C9300 fail?

Stored crash data is the most common cause, even if no airbag has deployed. A standard diagnostic tool cannot remove it. Other causes include ageing components, cold solder joints, moisture and corrosion at the plugs, and voltage spikes.

An accident leaves records in the control unit, even if no airbag was triggered. These entries remain because usual tools cannot remove them.

The remaining triggers lie in the electronics themselves or in their environment: components age, solder joints can be cold, and moisture with corrosion attacks the plugs.

Voltage spikes, for example with a weak battery or after a jump start, additionally stress the unit.

How can you tell that the 95910-C9300 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently. A fault message appears alongside, the diagnostic tool cannot find the control unit, and the fault memory cannot be cleared.

As long as the fault persists, airbags and seatbelt pretensioners may not trigger in an emergency.

The light shows that something is wrong. Only reading out the fault memory reveals the cause.

Which vehicles is the 95910-C9300 fitted in?

The 95910-C9300 is fitted in these vehicles: Hyundai Creta GS (2014-2017) and GS Facelift (2017-2021).

The overview below lists the models assigned to this number:

• Hyundai Creta GS (2014-2017)
• Hyundai Creta GS Facelift (2017-2021)

Check the number on the label of your removed unit against this page. That only shows whether it is the right part. Have the fault memory read out beforehand, because only the result shows whether the control unit itself is defective or whether a plug or cable is behind it.

For the same vehicles, we also repair control units with the part numbers 95910-A0000, 95910-A0700.

How does the repair of the 95910-C9300 work?

First have the fault memory read out and enclose the log, then disconnect the battery before removing the control unit. Afterwards create a repair order online and send the unit in, well packed. At Airbag24, processing usually takes 3–4 working days.

Airbag24 examines the unit on the test bench, repairs defective components, erases stored crash data and carries out a function test. Afterwards your own unit is sent back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-C9300 get to Airbag24?

You either send the unit as a parcel, or you book a UPS collection for an extra charge. Airbag24 also sends it back by UPS.

Enclose the printed repair order with the parcel and pack the unit shock-proof.