Airbag control unit with part number 95910-C9500

What does the airbag control unit 95910-C9500 do?

The airbag control unit 95910-C9500 coordinates the restraint system (SRS) of Hyundai. It evaluates the crash sensors and decides in an accident, within fractions of a second, which airbags and seatbelt pretensioners are triggered. After an accident, it stores crash data and locks itself.

The unit monitors the entire system continuously. If it finds a fault, it shows it via the airbag warning light. The lock after an accident is lifted only by the repair.

Why does the control unit 95910-C9500 fail?

With 95910-C9500, the most common cause is crash data stored from an earlier accident, even without a deployed airbag. A normal diagnostic tool cannot delete this data. Other causes are aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

The crash data remains in the memory until it is deleted during the repair. Airbag24 handles this deletion as part of the repair process.

Aged components and cold solder joints can lead to intermittent faults.

Moisture and corrosion on plugs disturb the contact, and voltage spikes, for example from a weak battery or a jump start, put strain on the electronics.

How can you tell that the 95910-C9500 is defective?

A defect in the 95910-C9500 can be recognised by several signs: the airbag warning light in the instrument cluster lights up permanently or intermittently, an error message appears, or the fault memory cannot be cleared.

The signs in detail:

• An error message appears in the instrument cluster.
• The diagnostic tool cannot establish a connection to the control unit.
• The fault memory cannot be cleared.

In an emergency, airbags and seatbelt pretensioners may fail to deploy in the event of such a defect. A prompt check is therefore advisable.

Which vehicles is the 95910-C9500 fitted in?

The 95910-C9500 was installed in these vehicles: Hyundai Creta GS (2014-2017) and GS Facelift (2017-2021).

The list is directly below.

• Hyundai Creta GS (2014-2017)
• Hyundai Creta GS Facelift (2017-2021)

Compare the number on the label of the removed unit with this page, because that shows you that it is the right unit. The comparison does not clarify the cause. So have the fault memory read out beforehand, because only this result shows whether the control unit is defective or whether a plug or cable causes the problem.

For the same vehicles, we also repair control units with the part numbers 95910-A0000, 95910-A0700.

How does the repair of the 95910-C9500 work?

First have the fault memory read out and attach the log, then disconnect the battery and remove the control unit 95910-C9500. Afterwards, create a repair order online and send the unit in well packed. Processing at Airbag24 usually takes 3–4 working days.

At Airbag24 the unit is inspected on the test bench, defective components are repaired, the stored crash data is deleted and a function test is carried out. Afterwards the unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-C9500 get to Airbag24?

You ship the control unit 95910-C9500 as a package, or have it collected by UPS for an extra charge. After the repair, UPS brings the unit from Airbag24 back to you.

The printed repair order goes into the package, and the unit is packed shockproof.