Airbag control unit with part number 95910-CC100

What does the airbag control unit 95910-CC100 do?

The airbag control unit 95910-CC100 is the control unit of the restraint system (SRS) for Kia. It receives the signals from the crash sensors, calculates within milliseconds in an emergency whether the airbags and seatbelt pretensioners are triggered, and monitors all components. If it detects a fault, the airbag warning light displays it; after an accident it stores crash data and locks itself.

Monitoring includes sensors, firing circuits and the activation of the seatbelt pretensioners, which the control unit checks continuously.

Without a clean supply voltage, the unit cannot perform its function reliably.

Why does the control unit 95910-CC100 fail?

On the 95910-CC100, faults are caused above all by crash data stored after an accident, even without an airbag having fired. A normal diagnostic tool does not delete it. In addition there are aged components, cold solder joints, moisture and corrosion at plug connectors, and voltage spikes.

They remain in the unit while the car has long since returned to normal driving.

Ageing electronics, a cold solder joint or a damp plug act gradually. A voltage spike, for example from a weak battery or a jump-start, can additionally stress components.

How can you tell that the 95910-CC100 is defective?

You can recognise a fault on the 95910-CC100 by the airbag warning light in the instrument cluster, which stays on permanently or intermittently. A fault message may also appear, the diagnostic tool does not find the control unit, and the fault memory remains after clearing. As a result, the airbags and seatbelt pretensioners may possibly not fire in an emergency.

The warning light does not stay on without reason: it indicates a detected deviation in the system that needs to be checked.

A look at the instrument cluster after starting shows whether the light goes out.

Which vehicles is the 95910-CC100 fitted in?

The 95910-CC100 is intended for the following vehicles: Kia Seltos SP2 (from 2019).

The vehicles are listed below:

• Kia Seltos SP2 (from 2019)

Compare the part number on the label of your removed unit with this page. This ensures that the unit fits; this comparison does nothing more. The fault memory then reveals whether the control unit is faulty or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 80100-Q5600WK, 80100Q5600, 95910-Q5100-95512.

How does the repair of the 95910-CC100 work?

For 95910-CC100, these steps apply in a fixed order: first have the fault memory read out and attach the log, then disconnect the battery, then remove the control unit. Only after that do you create the repair order online and send in the unit well packed. Processing at Airbag24 usually takes 3–4 working days.

Airbag24 examines the unit on the test bench, replaces faulty components, deletes stored crash data and carries out a function test.

Afterwards your own unit is returned. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-CC100 get to Airbag24?

You send the control unit 95910-CC100 to Airbag24 as a parcel, or you book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

Pack the unit shock-proof and enclose the printed repair order.