Airbag control unit with part number 95910-CC120

What does the airbag control unit 95910-CC120 do?

The airbag control unit 95910-CC120 is the central control unit of the restraint system (SRS) of Kia. It evaluates the signals from the crash sensors and decides, in a fraction of a second in an accident, which airbags and seatbelt pretensioners are triggered.

In operation the unit monitors the entire system. If it detects a fault, it stores it and reports it via the airbag warning light in the instrument cluster.

After an accident the control unit stores crash data and locks itself. Because it controls all airbags and seatbelt pretensioners, a failure directly affects the protection in the vehicle.

Why does the control unit 95910-CC120 fail?

The most common cause for 95910-CC120 is crash data stored after an accident, even when no airbag has deployed. Other causes are ageing components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

The crash data remains in memory until Airbag24 erases it during the repair. It cannot be removed with a normal diagnostic tool.

Electronic components age, and solder joints can go cold. Moisture and corrosion at plug connections add further strain on the unit.

Voltage spikes, for example from a weak battery or when jump-starting, can also lead to faults.

How can you tell that the 95910-CC120 is defective?

A defect in the 95910-CC120 is recognised by the airbag warning light in the instrument cluster, which lights up permanently or intermittently. Other signs are a fault message in the instrument cluster, no connection to the diagnostic tool and a fault memory that cannot be cleared.

The airbag warning light is the most important signal in the vehicle: it lights up as soon as the system has detected a fault, either permanently or intermittently. With such a defect, airbags and seatbelt pretensioners may not deploy in an emergency, so a check without delay makes sense.

Which vehicles is the 95910-CC120 fitted in?

The 95910-CC120 is fitted in these vehicles: Kia Seltos SP2 (from 2019).

The following list shows the vehicles that Airbag24 has assigned to this part number:

• Kia Seltos SP2 (from 2019)

Compare the part number on the label of the removed unit with this page. This only ensures that you have the correct unit. Also have the fault memory read out beforehand, because only this result shows whether the control unit is defective or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 80100-Q5600WK, 80100Q5600, 95910-Q5100-95512.

How does the repair of the 95910-CC120 work?

First have the fault memory read out and attach the log. Then disconnect the battery and only then remove the control unit 95910-CC120. Next, create a repair order online and send in the well-packed unit.

Airbag24 checks the unit on the test bench, repairs defective components, erases the stored crash data and carries out a function test. Afterwards your own unit is returned to you. Processing at Airbag24 usually takes 3–4 working days.

This order must be followed for safety reasons. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-CC120 get to Airbag24?

The route is either a parcel that you send yourself, or a UPS collection booked for an extra charge. Returns after the repair are made by UPS.

Include the printed repair order with the parcel, and pack the control unit shockproof.