Airbag control unit with part number 95910-CC210

What does the airbag control unit 95910-CC210 do?

The control unit 95910-CC210 is the control unit of the restraint system (SRS) of Kia. It continuously checks the signals from the impact sensors and decides in an emergency within milliseconds which airbags and seatbelt pretensioners are triggered.

The unit detects faults itself and shows them via the airbag warning light in the instrument cluster. The system is therefore designed for permanent self-checking.

After an accident, it creates crash data and locks itself.

Why does the control unit 95910-CC210 fail?

For the 95910-CC210, crash data that remains in the memory after an accident is the most common cause, even without an airbag having been triggered. An ordinary diagnostic tool cannot remove it; the deletion takes place at Airbag24 as part of the repair. Further causes are aged components, cold solder joints, moisture and corrosion at plug connectors, and voltage spikes.

Crash data is not visible on the vehicle. Whether it is present is therefore only shown by reading out the fault memory.

The electronic causes act gradually: components age, solder joints lose contact, and moisture entering plug connections causes corrosion. Voltage spikes, for example from a weak battery or jump-starting, can also load the electronics.

How can you tell that the 95910-CC210 is defective?

On the 95910-CC210, a defect shows itself through the airbag warning light in the instrument cluster, which stays on permanently or intermittently. In addition, a fault message appears, the diagnostic tool does not find the control unit, and the fault memory cannot be cleared.

If the warning light stays on, airbags and seatbelt pretensioners may not be able to trigger in an emergency. The indication is therefore a sign that you should follow up promptly.

Which vehicles is the 95910-CC210 fitted in?

The control unit 95910-CC210 is fitted at Kia in these vehicles: Kia Seltos SP2 (from 2019). Whether it matches your vehicle follows from the data for this part number.

The following vehicles are recorded for this part number:

• Kia Seltos SP2 (from 2019)

Comparing the part number on the label of the removed unit with this page clarifies the identity of the unit. Whether the control unit is defective or a plug or cable is the cause is shown only by the fault memory, which you should have read out beforehand.

For the same vehicles, we also repair control units with the part numbers 80100-Q5600WK, 80100Q5600, 95910-Q5100-95512.

How does the repair of the 95910-CC210 work?

First have the fault memory read out and attach the log. Then disconnect the battery, remove the control unit, create the repair order online and send the well-packed unit. Airbag24 checks it, repairs defective components and tests the function.

The battery must be disconnected before the control unit is removed. This sequence belongs to the safety requirements of the airbag system.

At Airbag24 checking, repairing and testing usually take 3–4 working days. Stored crash data is deleted, and then your own unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-CC210 get to Airbag24?

The 95910-CC210 goes to Airbag24 either as a parcel or with a UPS collection booked for an extra charge. After the repair, Airbag24 sends it back by UPS.

Put the printed repair order into the parcel and pack the unit shockproof.