Airbag control unit with part number 95910-CC250

What does the airbag control unit 95910-CC250 do?

The airbag control unit 95910-CC250 controls the restraint system (SRS) for Kia. It evaluates the crash sensors, determines within fractions of a second which airbags and seatbelt pretensioners are triggered, and monitors the system continuously.

If the unit detects a fault, it shows this via the airbag warning light in the instrument cluster.

After an accident the unit stores crash data and then locks itself. This sequence is part of the design of the unit.

Why does the control unit 95910-CC250 fail?

Stored crash data is the most common cause of a defect on the 95910-CC250, even if no airbag has fired. A normal diagnostic tool does not erase it. Other causes include aged electronics, cold solder joints, moisture and corrosion, and voltage spikes.

Airbag24 removes the crash data during the repair, because the statement that it can be erased refers precisely to that.

Aged components and cold solder joints make the electronics unreliable. Moisture and corrosion at plug connections disrupt the contact, and voltage spikes arise, for example, with a weak battery or jump-starting.

How can you tell that the 95910-CC250 is defective?

The airbag warning light in the instrument cluster lights on the 95910-CC250 permanently or intermittently. A fault message accompanies it, and the fault memory cannot be erased.

• airbag warning light lights permanently or intermittently
• fault message in the instrument cluster
• the diagnostic tool gets no connection to the control unit
• the fault memory remains and cannot be erased

In an emergency, airbags and seatbelt pretensioners may then possibly not deploy. Please have this checked promptly.

Which vehicles is the 95910-CC250 fitted in?

The control unit 95910-CC250 is fitted in these vehicles: Kia Seltos SP2 (from 2019).

The vehicle list in detail:

• Kia Seltos SP2 (from 2019)

First compare the part number on the label of the removed unit with this page. This confirms only the unit, not the cause. Have the fault memory read out beforehand, because it shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 80100-Q5600WK, 80100Q5600, 95910-Q5100-95512.

How does the repair of the 95910-CC250 work?

You read out the fault memory and enclose the log. Then you disconnect the battery and remove the control unit 95910-CC250. Next you create a repair order online and pack the unit well before sending it. Processing at Airbag24 usually takes 3–4 working days.

Airbag24 then takes over: the unit is examined, defective components are repaired, crash data is erased and a functional test is carried out. Afterwards your unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-CC250 get to Airbag24?

You can send the control unit 95910-CC250 as a parcel or book a UPS collection for an extra charge. The return shipment after the repair is made by UPS.

Put the printed repair order into the parcel. Pack the unit shock-proof as well.