Airbag control unit with part number 95910-CC350

What does the airbag control unit 95910-CC350 do?

The airbag control unit 95910-CC350 is the control unit of the restraint system (SRS) for Kia. It evaluates the signals from the crash sensors and decides within milliseconds in an accident which airbags and seatbelt pretensioners are triggered.

At the same time it monitors the system's components continuously. If it detects a fault, it reports it via the airbag warning light.

After an accident the unit stores crash data and locks itself. The repair lifts this lock.

Why does the control unit 95910-CC350 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed. Other causes include aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes at the 95910-CC350.

A standard diagnostic tool does not erase the crash data. These entries remain until they are removed during the repair.

The other causes mainly affect the electronics themselves. Components age, solder joints can go cold, and moisture and corrosion attack the plug connections. Jump starts or a weak battery can create voltage spikes that damage the unit.

How can you tell that the 95910-CC350 is defective?

A defect shows up on the airbag warning light in the instrument cluster, which lights up permanently or intermittently, and as a fault message. The diagnostic tool gets no connection to the control unit, and the fault memory cannot be cleared.

In that case airbags and seatbelt pretensioners may possibly not deploy in an emergency. Therefore do not wait with a lit warning light, but take it seriously.

What matters is that the warning light shows the defect as soon as it occurs.

Which vehicles is the 95910-CC350 fitted in?

The control unit 95910-CC350 is fitted in these vehicles: Kia Seltos SP2 (from 2019).

The following vehicles are recorded for this unit:

• Kia Seltos SP2 (from 2019)

Compare the part number on the label of the removed unit with this page. This only ensures that it is the right unit.

Have the fault memory read out beforehand. This log alone shows whether the control unit is defective or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 80100-Q5600WK, 80100Q5600, 95910-Q5100-95512.

How does the repair of the 95910-CC350 work?

First have the fault memory read out and enclose the log. Then disconnect the battery and only then remove the control unit. Airbag24 usually processes the unit in 3–4 working days.

This period concerns only checking, repairing and testing at Airbag24. Then create a repair order online and send in the unit well packed.

Airbag24 tests it on the test bench, replaces defective components, erases the stored crash data and carries out a function test. The unit then goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-CC350 get to Airbag24?

You send the control unit 95910-CC350 as a parcel or book a UPS collection for an extra charge. After the repair Airbag24 sends it back via UPS.

The printed repair order belongs in the parcel, and the unit is packed shockproof.