Airbag control unit with part number 95910-CC400

What does the airbag control unit 95910-CC400 do?

The airbag control unit 95910-CC400 coordinates the restraint system (SRS) of Kia. It processes the readings from the crash sensors, decides within milliseconds in a crash which airbags and seatbelt pretensioners fire, and reports faults via the airbag warning light.

The control unit continuously checks the chain of sensors and actuators. After an accident it stores crash data and then locks itself.

Why does the control unit 95910-CC400 fail?

The most common cause is crash data stored from an earlier accident, even if no airbag has deployed. Also possible are aged electronics, cold solder joints, moisture at plug connections and voltage spikes.

The crash data remains in the unit, as a normal diagnostic tool cannot remove it. Aged electronic components gradually lose reliability, and cold solder joints can lose contact without a fault being immediately visible.

Moisture and corrosion at plug connections disrupt signal transmission. Voltage spikes, for example from a weak battery or from jump-starting, put additional stress on the components.

How can you tell that the 95910-CC400 is defective?

A defect shows up mainly as the airbag warning light in the instrument cluster. If it lights up permanently or intermittently, the airbags and seatbelt pretensioners may not deploy in an emergency.

The specific signs:

• Airbag warning light lit permanently or intermittently
• Error message in the instrument cluster
• No connection between the diagnostic tool and the control unit
• Fault memory that cannot be cleared

The warning light reports the defect as soon as the system detects it. Do not ignore it.

Which vehicles is the 95910-CC400 fitted in?

The 95910-CC400 is fitted in these vehicles: Kia Seltos SP2 (from 2019).

The list shows the vehicles for this part number:

• Kia Seltos SP2 (from 2019)

Checking the part number on the label of the removed unit against this page only confirms that you have the right control unit. Whether the unit itself is defective, or a plug or cable is behind the fault, is shown only by the fault memory, which you should have read out beforehand.

For the same vehicles, we also repair control units with the part numbers 80100-Q5600WK, 80100Q5600, 95910-Q5100-95512.

How does the repair of the 95910-CC400 work?

First have the fault memory read out and enclose the log. Then disconnect the battery, remove the control unit 95910-CC400 and create the repair order online. Pack the unit well and send it in.

Airbag24 checks the unit on the test bench, replaces defective components, erases the stored crash data and carries out a function test. Processing usually takes 3–4 working days and comprises only checking, repairing and testing.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-CC400 get to Airbag24?

You send control unit 95910-CC400 to Airbag24 as a parcel, or have it collected by UPS for an extra charge. Airbag24 sends it back to you by UPS after the repair.

Pack the unit shockproof and enclose the printed repair order.