Airbag control unit with part number 95910-CL000

What does the airbag control unit 95910-CL000 do?

The airbag control unit 95910-CL000 is the switching centre of the SRS restraint system in Hyundai vehicles. In an accident it evaluates the crash sensors and decides within milliseconds which airbags and seatbelt pretensioners trigger. While driving it monitors the system continuously and reports faults via the airbag warning light.

The monitoring covers sensors, wiring and the power supply. Detected deviations are recorded in the fault memory and can be read out later.

After an accident the unit stores crash data and locks itself. The lock is lifted only by the repair at Airbag24.

Why does the control unit 95910-CL000 fail?

The most common cause is crash data stored after an accident, even if no airbag has triggered. Further causes are ageing electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

Crash data cannot be removed with a usual diagnostic tool. It remains in the memory of the unit until the repair erases it.

The other causes concern the condition of the electronics. Components age, solder joints can become cold, and moisture or corrosion attack the plug connections.

Voltage spikes also belong here, for example when the battery is weakening or during a jump start. Loads of this kind act directly on the electronics.

How can you tell that the 95910-CL000 is defective?

The airbag warning light in the instrument cluster lights up continuously or intermittently. In addition an error message appears in the instrument cluster, there is no connection to the diagnostic tool, and the fault memory cannot be cleared.

• airbag warning light that lights up continuously or intermittently
• error message in the instrument cluster
• no contact between diagnostic tool and control unit
• fault memory that cannot be cleared

Such signs mean that airbags and seatbelt pretensioners may in an emergency not trigger. The warning light is therefore a warning that you should take seriously.

Which vehicles is the 95910-CL000 fitted in?

The 95910-CL000 is fitted in this vehicle: Hyundai Santa Fe TM Facelift (2020-2024).

The assignment is shown in the following list with model series and years of construction.

• Hyundai Santa Fe TM Facelift (2020-2024)

Comparing the part number on the label of the removed unit with this page only confirms that you have the right unit. Whether the control unit is defective or a plug or cable is the cause only becomes apparent from the fault memory, which you have read out beforehand.

For the same vehicles, we also repair control units with the part numbers 95910-2B600, 95910-2B610, 95910-2B620, 95910-2B650, 95910-2B970.

How does the repair of the 95910-CL000 work?

You have the fault memory read and attach the log before disconnecting the battery. Then remove the control unit, create a repair order online and send the well-packed unit in. Processing at Airbag24 usually takes 3–4 working days.

Airbag24 checks the control unit on the test bench, replaces defective components, erases the crash data and carries out a function test. Afterwards the unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-CL000 get to Airbag24?

You can send the unit as a parcel or book a UPS collection for an extra charge. The return after the repair runs via UPS.

The printed repair order belongs in the parcel, and the unit must be packed shock-resistant.