Airbag control unit with part number 95910-CL100

What does the airbag control unit 95910-CL100 do?

The airbag control unit 95910-CL100 coordinates the restraint system (SRS) in Hyundai. It evaluates the signals from the crash sensors and determines in an accident which airbags and seatbelt pretensioners are triggered.

It monitors the system continuously. If it detects a fault, it shows it via the airbag warning light in the instrument cluster, so that you notice the error promptly.

After an accident, the control unit stores crash data and then locks itself. This is the starting point for the repair described on this page.

Why does the control unit 95910-CL100 fail?

Stored crash data from an accident is the most common cause, even when no airbag has deployed. Other causes include ageing electronics, dry solder joints, moisture and corrosion on plug connectors, and voltage spikes.

A normal diagnostic tool cannot remove this crash data, so it remains in the control unit. Airbag24 erases it during the repair.

For the remaining causes, age and environment play the main role. Components wear out, solder joints can go cold, and moisture attacks the contacts. Voltage spikes, for example from a weak battery, put additional strain on the electronics.

How can you tell that the 95910-CL100 is defective?

The airbag warning light in the instrument cluster indicates the defect. A diagnostic tool cannot find a connection to the control unit, and the fault memory cannot be cleared.

Typical signs are:

• The airbag warning light stays on constantly or only intermittently.
• A fault message appears in the instrument cluster.
• The diagnostic tool cannot reach the control unit.
• The fault memory cannot be cleared.

In this case, airbags and seatbelt pretensioners may not deploy in an emergency. Have the system examined without long delay.

Which vehicles is the 95910-CL100 fitted in?

The vehicle registration document shows you most quickly whether your car belongs to this part number. The 95910-CL100 is fitted in these vehicles: Hyundai Santa Fe TM Facelift (2020-2024).

You will find the vehicles recorded for this unit here:

• Hyundai Santa Fe TM Facelift (2020-2024)

Compare the part number on the label of the removed unit with this page. This only shows that you have the right unit in front of you. Also have the fault memory read out, because only it reveals whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-2B600, 95910-2B610, 95910-2B620, 95910-2B650, 95910-2B970.

How does the repair of the 95910-CL100 work?

First have the fault memory read out and attach the log. Processing at Airbag24 usually takes 3–4 working days.

Then disconnect the battery, remove the control unit and create the repair order online. After that, pack the unit well for shipping.

Airbag24 checks the unit on the test bench, replaces defective components, erases the crash data and carries out a function test. After that, your own unit is returned to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-CL100 get to Airbag24?

You send the control unit 95910-CL100 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

Enclose the printed repair order and pack the unit shock-resistant.