Airbag control unit with part number 95910-CL270

What does the airbag control unit 95910-CL270 do?

The airbag control unit 95910-CL270 forms the control centre of the SRS restraint system for Hyundai. In an accident it evaluates the signals from the crash sensors and decides within milliseconds which airbags and seatbelt pretensioners trigger.

During continuous operation it checks the remaining components of the system. It shows any faults it finds via the airbag warning light in the instrument cluster. After an accident, it stores crash data and locks itself.

Why does the control unit 95910-CL270 fail?

The most common cause with the 95910-CL270 is crash data after an accident, which is stored even when no airbag has been triggered. Further causes are ageing electronic components, dry solder joints, moisture and corrosion at plug connections, and voltage spikes.

Crash data cannot be erased with a standard diagnostic tool. Airbag24 removes it during the repair, so you do not need to take care of it yourself.

Ageing components and dry solder joints affect the electronics directly. Moisture and corrosion attack the plug connections, and voltage spikes arise, for example, from a weak battery or a jump start.

How can you tell that the 95910-CL270 is defective?

A defective 95910-CL270 is recognised by the airbag warning light in the instrument cluster, which stays on permanently or intermittently. Fault messages may also appear, the diagnostic tool cannot connect to the control unit, and the fault memory cannot be cleared.

With such signs, the airbags and seatbelt pretensioners may not deploy in an emergency. Please follow up on this warning promptly and have the cause checked.

Which vehicles is the 95910-CL270 fitted in?

The 95910-CL270 is fitted in these vehicles: Hyundai Santa Fe TM Facelift (2020-2024).

We list the models with this part number here:

• Hyundai Santa Fe TM Facelift (2020-2024)

Compare the part number on the label of the removed unit with this page. This only confirms that you have the matching unit. Have the fault memory read out beforehand, because only the log shows whether the control unit is defective or whether a connector or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-2B600, 95910-2B610, 95910-2B620, 95910-2B650, 95910-2B970.

How does the repair of the 95910-CL270 work?

First have the fault memory read out and enclose the log. Then disconnect the battery and remove the 95910-CL270. Airbag24 usually needs 3–4 working days for checking, repairing and testing.

Next, create a repair order online and pack the unit shockproof for shipping. At Airbag24, the test bench checks the unit, replaces defective components, erases the crash data and carries out a functional test. Your own unit is then returned to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-CL270 get to Airbag24?

You send the 95910-CL270 as a parcel, or you book a UPS collection for an extra charge. After the repair, Airbag24 returns the 95910-CL270 to you by UPS.

The printed repair order goes in the parcel. Pack the control unit shockproof so that it survives transport undamaged.