Airbag control unit with part number 95910-CO000

What does the airbag control unit 95910-CO000 do?

The airbag control unit 95910-CO000 is the central control unit of the restraint system (SRS) for Kia. It evaluates the signals from the crash sensors and, in an accident, decides within milliseconds which airbags and seatbelt pretensioners are triggered.

The control unit also monitors the entire system continuously. If it detects a fault, it reports this via the airbag warning light in the instrument cluster.

After an accident the control unit stores crash data and locks itself. The next section explains what this involves.

Why does the control unit 95910-CO000 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed; an ordinary diagnostic tool cannot clear it. Other causes include ageing electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

Crash data remains in the unit after an accident, even if no airbag has been triggered. Clearing it with an ordinary diagnostic tool does not work.

Electronic components age, and cold solder joints can develop over time. Moisture and corrosion at plug connections disrupt signal transmission.

Voltage spikes, for example from a weak battery or a jump-start, place additional strain on the electronics.

How can you tell that the 95910-CO000 is defective?

The airbag warning light in the instrument cluster stays on permanently or intermittently, and an error message appears. In addition, the diagnostic tool gets no connection to the control unit, and the fault memory cannot be cleared.

• Airbag warning light stays on permanently or intermittently
• Fault message in the instrument cluster
• Diagnostic tool gets no connection to the control unit
• Fault memory cannot be cleared

In an emergency, the airbags and seatbelt pretensioners may then fail to deploy. Please have the vehicle checked promptly.

Which vehicles is the 95910-CO000 fitted in?

The airbag control unit 95910-CO000 is fitted in these vehicles: Kia Seltos SP2 (from 2019).

The vehicles assigned to this part number are listed here:

• Kia Seltos SP2 (from 2019)

Compare the part number on the label of the removed unit with this page. This shows you that you have the right unit in front of you. Also have the fault memory read out beforehand, because the log shows whether the control unit is defective or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 80100-Q5600WK, 80100Q5600, 95910-Q5100-95512.

How does the repair of the 95910-CO000 work?

First have the fault memory read out and enclose the log, then disconnect the battery. Only then remove the control unit 95910-CO000, create the repair order online and send in the unit, well packed. At Airbag24, testing, repairing and checking usually take 3–4 working days.

Airbag24 checks the submitted unit on the test bench and replaces defective components where necessary. Stored crash data is erased, followed by a function test. Afterwards you receive your own unit back.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-CO000 get to Airbag24?

You send the unit as a parcel or arrange a UPS collection for an extra charge. After the repair Airbag24 returns it by UPS. Put the printed repair order into the parcel and pack the unit shock-resistant.

Make sure the control unit does not shift inside the carton, and pad the gaps well.