Airbag control unit with part number 95910-CV000

What does the airbag control unit 95910-CV000 do?

The airbag control unit 95910-CV000 controls the restraint system (SRS) of Kia. It reads the signals from the crash sensors and, in an accident, decides within fractions of a second which airbags and seatbelt pretensioners are triggered. After an accident it stores crash data and locks itself; only the repair lifts the lock.

The unit monitors the entire system even during normal driving. This includes the sensors, the firing circuits and the power supply of the system. If it detects a deviation, it shows this via the airbag warning light in the instrument cluster.

The control unit is a decision point: it checks the situation before any ignition takes place. That is why flawless function is central to protecting the occupants.

Why does the control unit 95910-CV000 fail?

Stored crash data after an accident is the most common cause, even if no airbag has deployed. A normal diagnostic tool cannot erase this crash data; Airbag24 erases it during repair. Other causes include aged electronic components, cold solder joints, moisture and corrosion at plug connectors, and voltage spikes, for example from a weak battery or jump-starting.

That crash data is stored only becomes apparent during fault diagnosis, not at first glance at the unit.

The other causes develop during operation: electronics age, solder joints can turn cold, and moisture worsens the contact at plugs. A brief voltage spike can also affect the electronics.

How can you tell that the 95910-CV000 is defective?

A defect shows itself through the airbag warning light in the instrument cluster, which lights up permanently or intermittently, and through an error message in the instrument cluster. In addition, the diagnostic tool finds no connection to the control unit, and the fault memory cannot be cleared.

In an emergency, airbags and seatbelt pretensioners may not deploy in the event of such a defect. You should therefore take the warning seriously.

The cause does not always lie in the control unit itself. Cables or plugs can also cause similar warnings.

Which vehicles is the 95910-CV000 fitted in?

The control unit 95910-CV000 is fitted in these vehicles: Kia EV6 CV (from 2021).

Here is the overview of the vehicles stored for this number.

• Kia EV6 CV (from 2021)

Check the part number on the label of the removed unit against this page; that way you know you have the right unit in front of you. Also have the fault memory read out beforehand, because only this result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 4295018160, 95910CV100, 95910CV200, 95910CV300.

How does the repair of the 95910-CV000 work?

Processing at Airbag24 usually takes 3–4 working days. That time is planned for testing, repair and function test, after which your own unit goes back to you.

The sequence is fixed for safety reasons: first the fault memory is read out and the log enclosed, then the battery is disconnected, and finally the control unit is removed.

Then create a repair order online and send the unit in well packed. Airbag24 tests the unit on the test bench, repairs defective components, erases stored crash data and carries out a function test.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-CV000 get to Airbag24?

Shipping runs as a parcel or with a UPS collection that you book for an extra charge. Airbag24 sends the repaired unit back to you by UPS afterwards.

Place the printed repair order in the parcel, and pack the unit shock-resistant.