Airbag control unit with part number 95910-CV010

What does the airbag control unit 95910-CV010 do?

The airbag control unit 95910-CV010 is the restraint system (SRS) control unit for Kia. It evaluates the signals from the crash sensors, decides in a crash within milliseconds which airbags and seatbelt pretensioners are triggered, and monitors the system continuously. It shows faults to the driver via the airbag warning light.

The unit works in the background and checks the connections to the components, which include crash sensors, seatbelt pretensioners and airbags.

After a crash it stores crash data and locks itself. In the workshop it is therefore a central point of fault finding.

Why does the control unit 95910-CV010 fail?

The most common cause is stored crash data after an accident, even if no airbag was triggered; a normal diagnostic tool does not erase it. Other causes include aged components, cold solder joints, moisture and corrosion, and voltage spikes, for example from jump-starting.

The other causes:

• aged components
• cold solder joints
• moisture and corrosion at plug connectors
• voltage spikes, for example from a weak battery

A check will show which cause applies.

How can you tell that the 95910-CV010 is defective?

The airbag warning light stays on permanently or intermittently, the diagnostic tool cannot reach the control unit, there are error messages in the instrument cluster, and the fault memory remains. In an emergency, airbags and seatbelt pretensioners may then not trigger.

An airbag warning light that only comes on intermittently is no reason for relief. It indicates a fault that must be investigated further.

That the diagnostic tool makes no contact can point to the condition of the unit or to the wiring. Only the precise check decides.

Which vehicles is the 95910-CV010 fitted in?

The airbag control unit 95910-CV010 is fitted in these vehicles: Kia EV6 CV (from 2021). The part number on the unit is the key to assignment.

The following vehicles are known:

• Kia EV6 CV (from 2021)

Comparing the part number on the label with this page ensures that it is the right unit, nothing more. Afterwards have the fault memory read out. Only this finding shows whether the control unit or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 4295018160, 95910CV100, 95910CV200, 95910CV300.

How does the repair of the 95910-CV010 work?

Have the fault memory read out and attach the log, then disconnect the battery, and only then remove the control unit. Create a repair order online and send in the unit well packed. At Airbag24, testing, repairing and checking usually takes 3–4 working days.

Airbag24 examines the unit on the test bench, replaces defective components, erases stored crash data and carries out a function test. Afterwards your own unit is returned to you.

The order of steps is binding, because the battery must be disconnected before removal.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-CV010 get to Airbag24?

You ship the control unit as a parcel or book a UPS collection for an extra charge. After the repair Airbag24 sends it back to you via UPS.

The printed repair order goes into the parcel. Pack the unit shockproof so that it arrives undamaged.