Airbag control unit with part number 95910-D3000

What does the airbag control unit 95910-D3000 do?

The airbag control unit 95910-D3000 controls the restraint system (SRS) of Hyundai centrally. It reads the crash sensors, determines within milliseconds in a crash which airbags and seatbelt pretensioners are triggered, and checks the entire system continuously.

The unit displays faults via the airbag warning light in the instrument cluster. It monitors wiring, firing circuits and sensors alike.

After an accident, the unit stores crash data and then locks itself.

Why does the control unit 95910-D3000 fail?

The most common cause is stored crash data after an accident, even if no airbag has deployed. Other causes include ageing electronics, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

Stored crash data remains in the control unit, because a normal diagnostic tool cannot remove it. The entry in the fault memory therefore persists.

The other causes concern the components themselves and their surroundings. The unit ages, solder joints can be cold, and moisture or corrosion damage the plug connections. Voltage spikes arise, for example, from a weak battery or after a jump start.

How can you tell that the 95910-D3000 is defective?

A defect shows through the airbag warning light in the instrument cluster when it is lit, through an error message, through a missing connection between the diagnostic tool and the control unit, or through a fault memory that cannot be erased. In an emergency, airbags and seatbelt pretensioners may then fail to deploy.

• Airbag warning light lit permanently or intermittently
• Error message in the instrument cluster
• No connection to the control unit
• Fault memory cannot be erased

The warning light is the clearest signal. Every indication justifies a read-out, regardless of whether it occurs once or repeatedly.

If there is no contact with the diagnostic tool, the cause may also lie in plugs or cables.

Which vehicles is the 95910-D3000 fitted in?

The airbag control unit 95910-D3000 is fitted in these vehicles: Hyundai Tucson TL (2015-2018) and TL Facelift (2018-2020).

The following overview lists the vehicles recorded for this part number.

• Hyundai Tucson TL (2015-2018)
• Hyundai Tucson TL Facelift (2018-2020)

Compare the part number on the label of the removed unit with this page. This ensures that you have the right unit. Have the fault memory read out beforehand, because only this log shows whether the control unit is defective or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-D3200, 95910-D3950, 95910-D7130, 95910-D7230, 95910-D7630.

How does the repair of the 95910-D3000 work?

Processing at Airbag24 usually takes 3–4 working days. Beforehand, you have the fault memory read out, enclose the log and disconnect the battery before removing the control unit. Then you create a repair order online and send in the well-packed unit.

Airbag24 checks the unit on the test bench, replaces defective components, erases the stored crash data and carries out a function test. Afterwards your own unit goes back to the sender. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-D3000 get to Airbag24?

You send the unit in as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

The printed repair order belongs in the parcel, and the unit should be packed shockproof.