Airbag control unit with part number 95910-D3030

What does the airbag control unit 95910-D3030 do?

The airbag control unit 95910-D3030 manages the restraint system of Hyundai. It evaluates the crash sensors, decides in an accident within milliseconds whether airbags and seatbelt pretensioners are triggered, and shows faults via the airbag warning light.

The unit works throughout every journey and checks the connection to sensors, airbags and seatbelt pretensioners. After an accident, it stores crash data and locks itself; the lock is lifted only by the repair.

Why does the control unit 95910-D3030 fail?

Crash data is the most common cause: it remains in the unit after an accident, even if no airbag has been triggered, and a standard diagnostic tool cannot erase it. Aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes can also come into play.

Crash data is the starting point of the lock. It is erased only at Airbag24, because erasing it is part of the repair.

The other causes lie in the electronics and their surroundings. These include ageing, cold solder joints, corrosion on the plugs and voltage spikes, for example when starting with an external power source.

How can you tell that the 95910-D3030 is defective?

The airbag warning light on the 95910-D3030 lights up permanently or intermittently, and an error message appears in the instrument cluster. The diagnostic tool gets no connection to the control unit, and the fault memory remains. In an emergency, the airbags and seatbelt pretensioners may fail to trigger.

The airbag warning light is the clearest sign. If it stays on permanently or flickers intermittently, the system has detected a fault that must be checked.

Which vehicles is the 95910-D3030 fitted in?

The airbag control unit 95910-D3030 is fitted in these vehicles: Hyundai Tucson TL (2015-2018) and TL Facelift (2018-2020).

The list covers the models of Hyundai in which this control unit is installed.

• Hyundai Tucson TL (2015-2018)
• Hyundai Tucson TL Facelift (2018-2020)

Comparing the part number on the label with this page confirms that the unit fits. Whether the control unit itself is defective or a connector or cable is behind the fault is shown only by the fault memory read out beforehand.

For the same vehicles, we also repair control units with the part numbers 95910-D3200, 95910-D3950, 95910-D7130, 95910-D7230, 95910-D7630.

How does the repair of the 95910-D3030 work?

You first have the fault memory read out and enclose the log. You disconnect the battery and only then remove the control unit 95910-D3030. You create the repair order online and send the unit in well packed. Airbag24 needs 3–4 working days in the normal course for testing, repairing and checking.

Afterwards, Airbag24 takes over: the unit is examined on the test bench, defective components are replaced, the crash data is erased and a function test is carried out.

Your own unit comes back to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-D3030 get to Airbag24?

You can send the unit 95910-D3030 as a parcel or have it collected by UPS for an extra charge. Airbag24 sends it back to you by UPS after the repair.

Enclose the printed repair order in the parcel. Shockproof packaging prevents damage during transport.