Airbag control unit with part number 95910-D3130

What does the airbag control unit 95910-D3130 do?

The airbag control unit 95910-D3130 is the control centre of the restraint system (SRS) in Hyundai vehicles. It processes the signals from the crash sensors and decides in an accident, within fractions of a second, which airbags and seatbelt pretensioners are triggered.

The unit also monitors the entire system constantly and reports faults via the airbag warning light in the instrument cluster.

After an accident it stores crash data and locks itself. In normal driving nothing of this is noticed, because the control unit works quietly in the background.

Why does the control unit 95910-D3130 fail?

The most common cause is stored crash data after an accident, even if no airbag has deployed; a normal diagnostic tool cannot delete it. Further causes are listed below:

Crash data is not visibly detectable, so a vehicle can seem inconspicuous after an incident.

• aged electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery or jump-starting

How can you tell that the 95910-D3130 is defective?

The airbag warning light in the instrument cluster reveals the defect: it lights up permanently or intermittently, and a fault message appears at the same time. If no connection can be established between the diagnostic tool and the control unit 95910-D3130, or the fault memory cannot be cleared, that is a sign as well; in an emergency, airbags and seatbelt pretensioners may then not trigger.

The message is a clear signal and should not be ignored.

Precisely because the light shows the defect, it is worth looking into the fault memory before taking further steps.

Which vehicles is the 95910-D3130 fitted in?

This control unit 95910-D3130 is fitted in these vehicles: Hyundai Tucson TL (2015-2018) and TL Facelift (2018-2020).

In detail, the following models are concerned:

• Hyundai Tucson TL (2015-2018)
• Hyundai Tucson TL Facelift (2018-2020)

Compare the part number on the label of the removed unit with this page; this only shows whether it is the correct unit. You should have the fault memory read out beforehand, because only it shows whether the control unit itself is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-D3200, 95910-D3950, 95910-D7130, 95910-D7230, 95910-D7630.

How does the repair of the 95910-D3130 work?

First have the fault memory read out and enclose the log; then disconnect the battery and only then remove the control unit 95910-D3130. Afterwards create a repair order online and send the unit in well packed.

Airbag24 checks the unit on the test bench, replaces defective components, deletes the stored crash data and carries out a function test. Afterwards your own unit is returned.

Processing at Airbag24 usually takes 3–4 working days. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-D3130 get to Airbag24?

You send the control unit 95910-D3130 as a parcel or book a UPS collection for an extra charge. After the repair Airbag24 returns it by UPS.

The printed repair order goes into the parcel, and the unit should be packed shock-proof.