Airbag control unit with part number 95910-D3410

What does the airbag control unit 95910-D3410 do?

The airbag control unit 95910-D3410 belongs to the restraint system (SRS) of Hyundai. It evaluates the crash sensors, decides within milliseconds in an accident which airbags and seatbelt pretensioners to trigger, and monitors the system at all times. It reports faults via the airbag warning light.

Without an accident, it runs unobtrusively in the background. After an accident, it stores crash data and locks itself. The lock is lifted only by a repair.

The unit works together with the other components of the system, such as sensors, wiring harnesses and triggers.

Why does the control unit 95910-D3410 fail?

The most common cause is crash data that remains stored after an accident, even without a deployed airbag, and that cannot be erased with a standard diagnostic tool. Other causes include aged electronics, cold solder joints, moisture and corrosion on connectors, and voltage spikes.

At Airbag24, the crash data is erased during the repair.

Aged electronics lose reliability over time, and cold solder joints can cause contact problems.

Moisture and corrosion on plug connections disrupt signal transmission. Voltage spikes, for example from a weak battery or a jump start, put additional strain on the electronics.

How can you tell that the 95910-D3410 is defective?

A fault shows up in the vehicle via the airbag warning light in the instrument cluster and through fault messages there.

• Fault message in the instrument cluster
• the diagnostic tool gets no connection to the control unit
• the fault memory cannot be cleared

In an emergency, airbags and seatbelt pretensioners may therefore fail to deploy.

Which vehicles is the 95910-D3410 fitted in?

The 95910-D3410 is fitted in these Hyundai models: Hyundai Tucson TL (2015-2018) and TL Facelift (2018-2020).

Here are the vehicles:

• Hyundai Tucson TL (2015-2018)
• Hyundai Tucson TL Facelift (2018-2020)

Comparing the part number on the label of the removed unit with this page only confirms that it is the correct unit. Whether the control unit is defective or a connector or cable is the cause only becomes clear once the fault memory has been read out. Please have this carried out beforehand.

For the same vehicles, we also repair control units with the part numbers 95910-D3200, 95910-D3950, 95910-D7130, 95910-D7230, 95910-D7630.

How does the repair of the 95910-D3410 work?

At Airbag24, checking, repairing and testing the 95910-D3410 usually takes 3–4 working days. The unit goes through fixed steps at Airbag24.

On the vehicle, a binding sequence applies: have the fault memory read out and enclose the report, then disconnect the battery and only then remove the control unit. Next, create a repair order online and send the unit in, well packed.

Airbag24 checks the unit on the test bench, repairs defective components, erases crash data and carries out a function test. Afterwards, your own unit is sent back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-D3410 get to Airbag24?

You send the control unit 95910-D3410 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back by UPS.

Enclose the printed repair order and pack the unit shock-resistant.