Airbag control unit with part number 95910-D3750

What does the airbag control unit 95910-D3750 do?

The airbag control unit 95910-D3750 evaluates the crash sensors in the restraint system (SRS) of Hyundai. Within milliseconds it determines which airbags and seatbelt pretensioners are triggered, and it monitors the entire system continuously.

The control unit registers faults in the system and indicates them via the airbag warning light in the instrument cluster. The sensor readings are continuously fed in during this process.

After an accident it stores crash data and then locks itself. Only a repair lifts the lock.

Why does the control unit 95910-D3750 fail?

Stored crash data is the most common cause on the 95910-D3750, even if no airbag was triggered. Other causes are aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

Crash data cannot be erased with a standard diagnostic tool. Airbag24 erases it as part of the repair.

The other causes in detail:

• Aged electronic components.
• Cold solder joints.
• Moisture and corrosion at plug connections.
• Voltage spikes, for example from a weak battery or a jump start.

How can you tell that the 95910-D3750 is defective?

The airbag warning light in the instrument cluster stays on permanently or intermittently. In addition, an error message appears in the instrument cluster, and the diagnostic tool finds no connection to the 95910-D3750.

The fault memory also cannot be cleared. As long as the defect exists, airbags and seatbelt pretensioners may not trigger in an emergency, which is why the warning light must be taken seriously.

A prompt check clarifies whether the fault lies in the control unit or in the connections.

Which vehicles is the 95910-D3750 fitted in?

The 95910-D3750 is fitted in these vehicles: Hyundai Tucson TL (2015-2018) and TL Facelift (2018-2020).

The following overview lists the vehicles assigned to this part number.

• Hyundai Tucson TL (2015-2018)
• Hyundai Tucson TL Facelift (2018-2020)

Comparing the label of the removed unit with this page only ensures that you have the right unit in front of you, nothing more. Have the fault memory read out beforehand; only its result shows whether the control unit is defective or whether a connector or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-D3200, 95910-D3950, 95910-D7130, 95910-D7230, 95910-D7630.

How does the repair of the 95910-D3750 work?

Processing at Airbag24 usually takes 3–4 working days. At the start you have the fault memory read out and attach the log, then you disconnect the battery and remove the 95910-D3750. Afterwards you create a repair order online and pack the unit well.

The process at Airbag24 begins with the check on the test bench. Airbag24 repairs defective components, the stored crash data is erased, and a function test completes the work.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-D3750 get to Airbag24?

You send the 95910-D3750 to Airbag24 in a parcel or book a UPS collection for an extra charge. Airbag24 returns the unit to you by UPS after the repair.

A printed repair order belongs in the parcel; pack the unit shock-proof as well.