Airbag control unit with part number 95910-D7110

What does the airbag control unit 95910-D7110 do?

The airbag control unit 95910-D7110 coordinates the restraint system of Hyundai in the vehicle. It reads the crash sensors, decides in an accident within milliseconds on the triggering of airbags and seatbelt pretensioners, and monitors the system continuously. It reports faults via the airbag warning light.

Monitoring runs in the background, even if you notice nothing of it. The connections to sensors, seatbelt pretensioners and airbags as well as the power supply are checked. Detected deviations are stored by the unit in the fault memory.

After an accident it stores crash data and locks itself. The lock is lifted only by the repair that Airbag24 carries out.

Why does the control unit 95910-D7110 fail?

The most common cause is crash data stored after an accident, even if no airbag was triggered. In addition there are ageing components, cold solder joints, moisture and corrosion, and voltage spikes.

• ageing electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery or a jump start

A standard diagnostic scanner does not remove the crash data. The other points depend on the age of the electronics, the connections and the power supply, and they cannot be reliably assigned without a check.

How can you tell that the 95910-D7110 is defective?

The airbag warning light lights up continuously or intermittently, and an error message appears in the instrument cluster. The diagnostic tool gets no connection to the control unit, and the fault memory remains.

• airbag warning light that stays on continuously or only intermittently
• error message in the instrument cluster
• diagnostic tool without connection to the control unit
• fault memory that cannot be cleared

If such signs appear, airbags and seatbelt pretensioners may in an emergency not trigger. The warning light shows the fault, which is why it is a warning you should take seriously.

Which vehicles is the 95910-D7110 fitted in?

The 95910-D7110 was fitted, for example, in these vehicles: Hyundai Tucson TL (2015-2018) and TL Facelift (2018-2020).

Here follows the list with model series and years of construction.

• Hyundai Tucson TL (2015-2018)
• Hyundai Tucson TL Facelift (2018-2020)

Compare the part number on the label of the removed unit with this page to make sure that it is the right unit. Have the fault memory read before removal, because this log shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-D3200, 95910-D3950, 95910-D7130, 95910-D7230, 95910-D7630.

How does the repair of the 95910-D7110 work?

First have the fault memory read and attach the log. Then disconnect the battery and remove the control unit. Checking, repairing and testing at Airbag24 usually takes 3–4 working days.

Afterwards you create the repair order online and send the well-packed unit in. Airbag24 checks it on the test bench, replaces defective components, erases the crash data and carries out a function test. The unit then returns to the sender.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-D7110 get to Airbag24?

You send the unit as a parcel, or you book a UPS collection for an extra charge. After the repair, UPS brings the unit back to you.

Place the printed repair order in the parcel and pack the unit shock-resistant.