Airbag control unit with part number 95910-D7130

What is the function of the airbag control unit 95910-D7130?

The airbag control unit with part number 95910-D7130 is the central safety module (SRS) in various Hyundai Tucson models. It processes signals from crash sensors and, in the event of a collision, controls the deployment of airbags as well as seatbelt pretensioners to ensure occupant safety.

As an original OEM component, this SRS module is specifically designed for Hyundai Tucson series TL, LM, and NX4. It serves as the brain of the vehicle’s passive safety system.

Its primary task is to continuously monitor and evaluate data from crash sensors distributed throughout the vehicle. If the control unit detects a collision exceeding predefined thresholds, it sends ignition pulses within milliseconds to the corresponding airbags and pyrotechnic seatbelt pretensioners.

Why does the control unit 95910-D7130 fail?

A failure of the control unit 95910-D7130 is most commonly caused by stored crash data after an accident, which locks the system. Other causes include electronic malfunctions due to water damage, corrosion, and moisture inside the vehicle that harm sensitive components.

The primary reason for an apparent malfunction is the storage of crash data. After airbags deploy, the control unit self‑locks for safety reasons and permanently stores accident data in its internal memory. This condition cannot be reset using conventional diagnostic tools.

Another frequent source of errors is environmental exposure. Due to its installation location in the center console, the unit is vulnerable to moisture—such as from leaking seals or spilled liquids—which leads to corrosion on circuit boards and connectors, resulting in irreparable damage in 99% of cases.

Mechanical damage or internal defects in electronic components like capacitors or processors can also cause total failure. For the Hyundai Tucson TL, related part numbers such as 95910-D7230 and 95910-D7630 exist and may exhibit similar fault patterns.

How do you recognize a defect in the 95910-D7130?

A defective 95910-D7130 control unit primarily manifests as a constantly illuminated or flashing SRS airbag warning light on the instrument cluster. Additionally, specific fault codes, such as B1111 (control unit defective), cannot be cleared with a diagnostic tool.

The clearest symptom is the persistently active airbag warning light, indicating to the driver that the entire restraint system is non‑functional and may fail to deploy in an accident.

During workshop diagnostics, the issue often appears as fault codes pointing to an internal error in the control unit. Attempts to clear these faults usually fail because the lock imposed by crash data or a hardware defect prevents it.

Before removal, however, check whether the problem stems from a loose connection at the yellow connectors. Cleaning the contacts and retrying the erase process may resolve the issue in rare cases; more often, though, an internal defect is present.

In which vehicles is the 95910-D7130 installed?

The airbag control unit 95910-D7130 is used exclusively in various generations and series of the Hyundai Tucson. At Airbag24, this specific control unit is professionally refurbished for models in the LM, TL, and NX4 series.

At Airbag24, we repair the control unit with part number 95910-D7130 for the following Hyundai models:

Hyundai Tucson (LM)

Hyundai Tucson (TL, model years 2015–2018)

Hyundai Tucson (TL facelift, model years 2018–2020)

Hyundai Tucson (NX4, model years 2020–2023)

Hyundai Tucson (NX4 facelift, from model year 2023 onward)

How does the repair of the 95910-D7130 proceed?

Professional repair at Airbag24 includes diagnosing the submitted 95910-D7130 control unit, erasing stored crash data, and inspecting the electronics. Defective components are replaced to restore full functionality, backed by a 12‑month warranty.

Before removal, it is recommended to read out the fault memory to confirm the root cause. Removal should only be performed with the battery disconnected and after waiting at least 30 minutes to prevent accidental airbag deployment. The unit is typically located in the center console.

After sending the unit to Airbag24, a detailed analysis follows. Technicians extract the internal memory to identify and remove crash data. Subsequently, the circuit board is inspected for physical damage such as corrosion or faulty solder joints and repaired at the component level if necessary.

After successful repair and factory reset, the control unit undergoes a functional test. The repaired unit is typically ready for immediate installation (plug-and-play), eliminating the need for an expensive new purchase and time-consuming reprogramming at an authorized dealer. We provide a 12-month warranty on every repair.

What shipping options does Airbag24 offer?

You can either ship your control unit to Airbag24 free of charge yourself or arrange a convenient UPS pickup from your preferred location. For return shipping, we offer free standard options as well as faster UPS express services, including cash-on-delivery.

For outbound shipping, you have two choices: send the securely packaged control unit on your own or bring it in person. Alternatively, you can use our portal to schedule a UPS pickup at your address or at a UPS Access Point.

Following repair, return shipping is handled according to your preferences. We offer the following options:

Free UPS standard shipping with delivery within 1–3 business days.

UPS express shipping for exceptionally fast delivery within 1–2 business days.

Both shipping methods can optionally be arranged with cash-on-delivery. Alternatively, you may choose to pick up the repaired control unit directly from our premises.