Airbag control unit with part number 95910-D7200

What does the airbag control unit 95910-D7200 do?

The airbag control unit 95910-D7200 coordinates the restraint system (SRS) of Hyundai. Within milliseconds, it evaluates the sensor readings in a crash and triggers the appropriate airbags and seatbelt pretensioners.

During operation it checks the entire system continuously. If it detects a fault, it shows this via the airbag warning light in the instrument cluster, so you can keep an eye on the condition at all times.

After an accident, the unit writes crash data to its memory and then locks itself.

Why does the control unit 95910-D7200 fail?

Crash data from an accident, which remains stored after the event, is the most common cause, even if no airbag has deployed. Aged components, cold solder joints, moisture and corrosion on plug connectors, and voltage spikes, for example from a weak battery or jump-starting, are further causes.

Crash data remains stored in the unit after an accident, and an ordinary diagnostic tool cannot erase it. Airbag24 deletes it during the repair of the control unit.

The other causes are related to age, environment and power supply. Electronic components change over the years, solder joints can lose contact as temperatures change, and moisture affects plug connectors. Voltage spikes place additional strain on the electronics.

How can you tell that the 95910-D7200 is defective?

If the airbag warning light in the instrument cluster stays on permanently or only intermittently, the instrument cluster shows an error message. In addition, the diagnostic tool cannot connect to the control unit, and the fault memory remains. In an emergency, airbags and seatbelt pretensioners may not be able to deploy as a result.

The airbag warning light indicates that the control unit has found a fault. The restraint system may then work with limitations, even when the vehicle drives normally. Do not take this warning lightly.

Whether the fault lies in the control unit itself only becomes clear when the fault memory is read out. Until then, the visible signs are enough to plan the next steps.

Which vehicles is the 95910-D7200 fitted in?

With part number 95910-D7200, this control unit is fitted in these vehicles: Hyundai Tucson TL (2015-2018) and TL Facelift (2018-2020).

The following vehicles belong to this part number:

• Hyundai Tucson TL (2015-2018)
• Hyundai Tucson TL Facelift (2018-2020)

Comparing the part number on the label of the removed unit with this page only confirms that you have the right unit. Whether the control unit is actually defective is shown only by the fault memory, which you should have read out beforehand.

For the same vehicles, we also repair control units with the part numbers 95910-D3200, 95910-D3950, 95910-D7130, 95910-D7230, 95910-D7630.

How does the repair of the 95910-D7200 work?

Before removal, have the fault memory read out and enclose the log. Only then disconnect the battery and remove the control unit. Next, create a repair order online and send in the properly packed unit.

The control unit is only removed after the log has been enclosed and the battery disconnected, and this does not change.

At Airbag24, specialist staff check the unit on the test bench, repair the defective components, delete the stored crash data and carry out a functional test. Processing usually takes 3–4 working days. Afterwards, your own unit is returned to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-D7200 get to Airbag24?

You send the unit as a parcel or book a UPS collection for an extra charge. After the repair, UPS returns your own unit to you.

Place the printed repair order in the parcel with the unit. Shock-resistant packaging protects the control unit on its way.