Airbag control unit with part number 95910-D7600

What does the airbag control unit 95910-D7600 do?

The airbag control unit 95910-D7600 evaluates the signals of the crash sensors in the restraint system (SRS) of Hyundai. In an accident it decides within milliseconds which airbags and seatbelt pretensioners are triggered. Faults are shown via the airbag warning light.

In operation, the unit monitors the entire system and stores findings in the fault memory.

After an accident, it stores crash data and locks itself.

Why does the control unit 95910-D7600 fail?

Stored crash data after an accident is the most common cause, even if no airbag has been triggered. A normal diagnostic tool cannot erase this data. Other causes are aged components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

The crash data are stored in the control unit itself, not in cables or plugs. Checking the connections alone is therefore not enough to rule out this cause.

The other causes affect the electronics through ageing, moisture or electrical spikes. Which of them applies in an individual case is determined only by the examination.

How can you tell that the 95910-D7600 is defective?

A defect shows itself through a permanently or intermittently lit airbag warning light, a fault message in the instrument cluster, no connection to the diagnostic tool, and a fault memory that cannot be cleared. In an emergency, airbags and seatbelt pretensioners may then fail to trigger.

The signs in detail:

• Airbag warning light stays on permanently or comes on intermittently
• Fault message in the instrument cluster
• Diagnostic tool receives no connection to the control unit
• Fault memory cannot be cleared

The warning light itself indicates the defect, so it must be taken seriously.

Which vehicles is the 95910-D7600 fitted in?

The assignment refers to this part number and to no other. The airbag control unit 95910-D7600 is fitted in these vehicles: Hyundai Tucson TL (2015-2018) and TL Facelift (2018-2020).

The following list shows the vehicles recorded for this number.

• Hyundai Tucson TL (2015-2018)
• Hyundai Tucson TL Facelift (2018-2020)

Comparing the number on the label of the removed unit with this page only confirms that it is the correct unit.

Having the fault memory read out before removal is the second step. Only this result shows whether the control unit is really defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-D3200, 95910-D3950, 95910-D7130, 95910-D7230, 95910-D7630.

How does the repair of the 95910-D7600 work?

First have the fault memory read out and attach the log to the unit. Then disconnect the battery and remove the control unit. After that, create a repair order online and send the unit in, well packed. Airbag24 inspects it, repairs defective components, erases stored crash data and tests the function.

The order of removal is mandatory for safety reasons.

Processing at Airbag24 normally takes 3–4 working days.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-D7600 get to Airbag24?

You send the unit to Airbag24 as a parcel or have it collected by UPS for an extra charge. The return after the repair is by UPS.

Pack the printed repair order in with the unit and protect the unit with shock-resistant packaging.