Airbag control unit with part number 95910-D7620

What does the airbag control unit 95910-D7620 do?

The airbag control unit 95910-D7620 is the control unit of the restraint system (SRS) for Hyundai. It reads the crash sensors and, in the event of an accident, triggers the appropriate airbags and seatbelt pretensioners within milliseconds.

In doing so, it monitors the entire system continuously and reports faults via the airbag warning light.

After an accident, it stores crash data and locks itself. The lock ends only with the repair.

Why does the control unit 95910-D7620 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed. Other possible causes are aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

Crash data cannot be erased with a standard diagnostic tool. Airbag24 removes it during the repair.

The other causes are ageing, moisture and electrical stress. Influences of this kind can hardly be assessed from the outside.

How can you tell that the 95910-D7620 is defective?

The airbag warning light in the instrument cluster stays on permanently or intermittently as soon as the control unit detects a fault. Further signs include a fault message in the instrument cluster, no connection to the diagnostic tool, and a fault memory that cannot be cleared.

If you notice these signs on the 95910-D7620, the airbags and seatbelt pretensioners may not deploy in an emergency. A check is then needed promptly, because the system can no longer reliably perform its protective function.

Which vehicles is the 95910-D7620 fitted in?

The 95910-D7620 is used in these vehicles: Hyundai Tucson TL (2015-2018) and TL Facelift (2018-2020).

The assignment of models is shown in the list that follows.

• Hyundai Tucson TL (2015-2018)
• Hyundai Tucson TL Facelift (2018-2020)

Comparing the part number on the label of the removed unit with this page gives you certainty that it is the right unit. Having the fault memory read out, on the other hand, answers the question of whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-D3200, 95910-D3950, 95910-D7130, 95910-D7230, 95910-D7630.

How does the repair of the 95910-D7620 work?

First, have the fault memory read out and enclose the log. Then disconnect the battery, and only then remove the control unit. At Airbag24, processing usually takes 3–4 working days.

Afterwards, you create a repair order online, pack the unit carefully and send it in.

Airbag24 checks the control unit on the test bench, replaces defective components, erases the crash data and carries out a function test. Your own unit is then sent back. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-D7620 get to Airbag24?

Either you send the unit as a parcel, or you book a UPS collection for an extra charge. After the repair, UPS brings the unit back from Airbag24.

The printed repair order goes with the parcel, and the packaging must absorb shocks.