Airbag control unit with part number 95910-D9050

What does the airbag control unit 95910-D9050 do?

At Kia, the airbag control unit 95910-D9050 is responsible for the restraint system (SRS). It reads the crash sensors and, in a collision, decides within milliseconds which airbags and seatbelt pretensioners are triggered.

It detects faults continuously and indicates them via the airbag warning light. A message may then appear in the instrument cluster.

After an accident it stores crash data and then locks itself.

Why does the control unit 95910-D9050 fail?

The most common cause is crash data stored after an accident, even if no airbag has fired; a normal diagnostic tool cannot erase it. On control unit 95910-D9050, aged components, cold solder joints, moisture and corrosion, and voltage spikes are additionally possible causes.

Airbag24 removes the crash data during the repair. After that, the memory of the unit is clear of these entries.

The other causes concern electronics and connections; they develop over time or through external influences on the power supply. Typical examples:

• aged electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes from a weak battery or a jump start

How can you tell that the 95910-D9050 is defective?

A defect in control unit 95910-D9050 shows itself through the airbag warning light in the instrument cluster, which stays on permanently or intermittently. A fault message, no connection to the diagnostic tool and a fault memory that cannot be cleared may accompany it; in this case, airbags and seatbelt pretensioners may not deploy in an emergency.

A fault message in the instrument cluster is only part of the picture. What counts is what the fault memory records, and you should have it read out promptly.

Even a warning light that goes out again from time to time deserves attention, because the unit may have stored the fault.

Which vehicles is the 95910-D9050 fitted in?

Control unit 95910-D9050 is fitted in this model: Kia Sportage QL (2015-2021). The basis is the information on this part number.

The list shows the vehicles to which we have assigned this part number.

• Kia Sportage QL (2015-2021)

Compare the part number on the label of the removed unit with this page to check whether it is the right unit. Also have the fault memory read out; only it shows whether the control unit itself is defective or whether a connector or cable is behind it.

For the same vehicles, we also repair control units with the part numbers 95910-3W800, 95910-D9000, 95910-F1000, 95910-F1070, 959100Z200.

How does the repair of the 95910-D9050 work?

Have the fault memory read out and attach the log, then disconnect the battery and only afterwards remove control unit 95910-D9050. Create a repair order online and send in the packed unit. Processing at Airbag24 usually takes 3–4 working days.

Airbag24 examines the unit on the test bench, replaces defective components, removes the crash data and subjects the control unit to a function test; afterwards your unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-D9050 get to Airbag24?

You send control unit 95910-D9050 as a parcel to Airbag24 or book a UPS collection for an extra charge. Airbag24 returns it to you by UPS after the repair.

The printed repair order goes into the parcel, and the unit should be packed shock-proof.