Airbag control unit with part number 95910-D9070

What does the airbag control unit 95910-D9070 do?

The airbag control unit 95910-D9070 is the central control unit of the restraint system (SRS) in Kia vehicles. It evaluates crash sensors, decides in the event of an accident within milliseconds on the triggering of airbags and seatbelt pretensioners, and monitors the system continuously.

It reports a fault via the airbag warning light in the instrument cluster.

After an accident it stores crash data and locks itself.

Why does the control unit 95910-D9070 fail?

The most common cause is crash data stored after an accident, even without an airbag deployment. Other causes are aged components, moisture and corrosion at plug connections, and voltage spikes.

Besides these, the following causes may be responsible:

• aged electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery or a jump start

A standard diagnostic tool does not remove the crash data. The inspection at Airbag24 establishes which cause is present.

How can you tell that the 95910-D9070 is defective?

The airbag warning light in the instrument cluster stays on permanently or intermittently as soon as a defect is present. It is accompanied by fault messages in the instrument cluster, a diagnostic tool without connection and a fault memory that cannot be cleared.

These signs clearly indicate that something in the system is wrong. The defect is therefore not invisible, because the warning light displays it.

In an emergency the airbags and seatbelt pretensioners may not deploy. Have the system checked promptly.

Which vehicles is the 95910-D9070 fitted in?

The control unit 95910-D9070 is fitted in these vehicles: Kia Sportage QL (2015-2021).

The vehicles at a glance:

• Kia Sportage QL (2015-2021)

Compare the part number on the label of the removed unit with this page. The comparison only confirms that you have the right unit in front of you.

Also have the fault memory read out beforehand. Only this result shows whether the control unit itself is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-3W800, 95910-D9000, 95910-F1000, 95910-F1070, 959100Z200.

How does the repair of the 95910-D9070 work?

Processing at Airbag24 usually takes 3–4 working days. Beforehand, have the fault memory read out, disconnect the battery and remove the control unit before you create a repair order online.

The order matters: first the read-out with the enclosed log, then the battery, and only afterwards the removal. Then send in the unit, well packed.

Airbag24 checks it on the test bench, replaces defective components, clears stored crash data and carries out a function test. Afterwards your own unit is sent back to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-D9070 get to Airbag24?

You send the unit as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns it by UPS.

Put the printed repair order into the parcel and pack the unit shock-proof.