Airbag control unit with part number 95910-D9400

What does the airbag control unit 95910-D9400 do?

The airbag control unit 95910-D9400 controls the SRS restraint system of Kia. It evaluates the crash sensors, determines in an accident within milliseconds which airbags and seatbelt pretensioners are triggered, and checks the system continuously for faults.

It shows any faults found via the airbag warning light. At the same time it records deviations in the fault memory.

After an accident the unit writes crash data and then locks itself.

Why does the control unit 95910-D9400 fail?

The most common cause lies in crash data that remains in memory after an accident, even if no airbag has deployed; an ordinary diagnostic tool does not erase it. Further causes are ageing electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

Crash data stays stored until it is removed during a repair. It therefore remains in place even if the accident was some time ago.

Ageing components and corrosion on contacts impair function over time. Voltage spikes, for example from a weak battery or a jump-start, can damage sensitive electronics.

How can you tell that the 95910-D9400 is defective?

The airbag warning light in the instrument cluster lights up constantly or intermittently, a fault message appears in the instrument cluster, the diagnostic tool finds no connection to the control unit, or the fault memory cannot be cleared. In an emergency, airbags and seatbelt pretensioners may then fail to deploy.

The warning light shows you the fault. If it stays on after starting or comes on while driving, have the system checked promptly.

Even if the diagnostic tool cannot establish a connection, this is a sign you should not ignore.

Which vehicles is the 95910-D9400 fitted in?

The airbag control unit 95910-D9400 is fitted in these vehicles: Kia Sportage QL (2015-2021).

The following list shows the vehicles for which this unit is intended.

• Kia Sportage QL (2015-2021)

Before removal, compare the part number on the label with this page so you know it is the correct unit. Also have the fault memory read out, because only this result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-3W800, 95910-D9000, 95910-F1000, 95910-F1070, 959100Z200.

How does the repair of the 95910-D9400 work?

First have the fault memory read out and enclose the log. Then disconnect the battery and only afterwards remove the control unit; online you then create a repair order and send the unit in well packed. Processing at Airbag24 usually takes 3–4 working days.

Airbag24 tests the unit on the test bench, replaces defective components and erases crash data. A function test follows, after which your own unit is returned.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-D9400 get to Airbag24?

You send the unit as a parcel or book a UPS collection for an extra charge. After the repair it is returned to you by UPS.

Put the printed repair order into the parcel and pack the unit shockproof.