Airbag control unit with part number 95910-E7000

What does the airbag control unit 95910-E7000 do?

The airbag control unit 95910-E7000 is the control unit of the restraint system (SRS) for Hyundai. It evaluates the signals from the crash sensors and decides in an accident within milliseconds which airbags and seatbelt pretensioners are triggered. It reports faults via the airbag warning light.

The unit checks the entire system continuously for irregularities. Sensors, wiring and firing circuits are part of this, and you do not need to set anything.

After an accident, it stores crash data and locks itself. Only the repair lifts this lock.

Why does the control unit 95910-E7000 fail?

The most common cause with the 95910-E7000 is crash data stored after an accident, even if no airbag was triggered. Other causes are aged electronics, moisture, cold solder joints, corrosion at plug connections and voltage spikes.

Crash data cannot be erased with a normal diagnostic tool. This means the fault can persist even after the wiring harness has been checked.

Aged electronics and cold solder joints can only be reliably identified on the test bench. Moisture and corrosion at plug connections cause contacts to fail. Voltage spikes, for example from a weak battery or a jump start, can stress the electronics.

How can you tell that the 95910-E7000 is defective?

A defect on the 95910-E7000 shows up as the airbag warning light in the instrument cluster, which lights up permanently or intermittently. In addition, a fault message appears in the instrument cluster, and the diagnostic tool gets no connection to the control unit.

• airbag warning light lights up permanently or intermittently
• fault message in the instrument cluster
• missing connection between the diagnostic tool and the control unit
• fault memory cannot be cleared

If the control unit is defective, the airbags and seatbelt pretensioners may fail to trigger in an emergency. So do not ignore a lit warning light.

Which vehicles is the 95910-E7000 fitted in?

The 95910-E7000 is fitted in these vehicles: Hyundai Grandeur HG (2011-2017).

The overview below lists the vehicles in which this control unit was installed.

• Hyundai Grandeur HG (2011-2017)

Compare the number on the label of the removed unit with 95910-E7000 on this page. This only confirms that you have the right unit. Also have the fault memory read out, because only the log shows whether the control unit itself is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-G8300, XC2361A-72F.

How does the repair of the 95910-E7000 work?

First you read out the fault memory and enclose the log. Then you disconnect the battery and only afterwards remove the control unit. Online, you create a repair order and send in the well-packed unit.

Airbag24 examines the unit on the test bench, repairs defective components, erases stored crash data and carries out a function test. Processing usually takes 3–4 working days. The unit is then returned to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-E7000 get to Airbag24?

You send in the control unit 95910-E7000 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns it to you by UPS.

Enclose the printed repair order in the parcel and pack the unit shockproof.