Airbag control unit with part number 95910-F0200

What does the airbag control unit 95910-F0200 do?

The airbag control unit 95910-F0200 is the central control unit of the restraint system (SRS) for Hyundai. It evaluates the signals from the crash sensors and decides in a crash, within fractions of a second, which airbags and seatbelt pretensioners are triggered.

Besides this, the unit monitors the entire system continuously. If it finds a fault, it reports it via the airbag warning light in the instrument cluster.

After an accident, the control unit stores crash data and locks itself. Only the repair lifts the lock.

Why does the control unit 95910-F0200 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed. Other possible causes are aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

A standard diagnostic tool cannot erase the stored crash data. Airbag24 erases it during the repair.

Electronic components age over time, and solder joints can go cold. Moisture and corrosion impair the contacts at plug connections.

Voltage spikes, for example from a weak battery or a jump start, additionally stress the electronics. Only the test shows which cause is actually present.

How can you tell that the 95910-F0200 is defective?

A defect in the 95910-F0200 shows itself through the airbag warning light in the instrument cluster, which stays on or comes on intermittently. Error messages may also appear, the diagnostic tool may have no connection to the control unit, and the fault memory cannot be cleared.

• airbag warning light in the instrument cluster stays on or comes on intermittently
• error message in the instrument cluster
• diagnostic tool finds no connection to the control unit
• fault memory cannot be cleared

As long as such a fault exists, the airbags and seatbelt pretensioners may not deploy in an emergency.

Therefore, have the cause clarified promptly. The warning light indicates the defect and is thus the first point of reference.

Which vehicles is the 95910-F0200 fitted in?

The 95910-F0200 is fitted in these vehicles: Hyundai Elantra AD.

The following overview shows the vehicles we have on record for this part number.

• Hyundai Elantra AD

Compare the part number on the label of the removed unit with this page. This only ensures that you have the right unit in front of you. Also have the fault memory read out before removal, because only this result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 3X959-10100, 95910-28510, 95910-28520, 95910-2D500, 95910-3X100, 95910-A5150.

How does the repair of the 95910-F0200 work?

The order of removal is fixed for safety reasons. At Airbag24, processing usually takes 3–4 working days.

First have the fault memory read out and attach the log. Then disconnect the battery, and only after that remove the control unit. Online, create the repair order, then pack the unit well and send it in.

Airbag24 tests the unit on the test bench, replaces defective components, erases the stored crash data and carries out a function test. Afterwards your own unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-F0200 get to Airbag24?

You send the 95910-F0200 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends your own unit back to you by UPS.

Put the printed repair order into the parcel and pack the unit shockproof.