Airbag control unit with part number 95910-F0250

What does the airbag control unit 95910-F0250 do?

The airbag control unit 95910-F0250 is the central control unit of the restraint system (SRS) for Hyundai. In an impact it decides within milliseconds whether the airbags and seatbelt pretensioners are triggered.

It monitors the system constantly and shows faults via the airbag warning light in the instrument cluster.

After an accident it stores crash data and locks itself. Airbag24 removes the crash data during the repair.

Why does the control unit 95910-F0250 fail?

The most frequent cause is stored crash data after an accident, even if no airbag has been triggered. Other causes are aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

The other causes in detail are:

• Aged electronic components
• Cold solder joints
• Moisture and corrosion at plug connections
• Voltage spikes, for example from a weak battery or a jump start

The crash data cannot be erased with a normal diagnostic tool. This step therefore belongs to the repair at Airbag24.

How can you tell that the 95910-F0250 is defective?

A defect shows up as the airbag warning light in the instrument cluster lighting up permanently or intermittently. Further findings that can be clearly described also occur.

• Airbag warning light lights up permanently or intermittently
• Fault message in the instrument cluster
• No connection from the diagnostic tool to the control unit
• Fault memory cannot be cleared

With these findings, airbags and seatbelt pretensioners may not trigger in an emergency. A prompt check is therefore advisable.

Which vehicles is the 95910-F0250 fitted in?

The control unit 95910-F0250 is fitted in these vehicles: Hyundai Elantra AD.

The vehicles in detail:

• Hyundai Elantra AD

Comparing the part number on the removed unit with this page only confirms that it is the correct unit. Whether the control unit is defective or a plug or cable is the cause only becomes clear from the fault memory. Have it read beforehand.

For the same vehicles, we also repair control units with the part numbers 3X959-10100, 95910-28510, 95910-28520, 95910-2D500, 95910-3X100, 95910-A5150.

How does the repair of the 95910-F0250 work?

First have the fault memory read and enclose the log. Then disconnect the battery and only afterwards remove the control unit. Create a repair order online and send in the unit, well packed. Airbag24 checks it on the test bench, replaces defective components if necessary, erases the crash data and runs a function test. The unit then goes back to you.

Processing at Airbag24 usually takes 3–4 working days. This time applies only to the checking, repairing and testing with us.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-F0250 get to Airbag24?

You send the unit in as a parcel or book a UPS collection for an extra charge. After the repair Airbag24 sends it back to you by UPS. Put the printed repair order in the parcel and pack the unit shock-proof.

Sturdy packaging with ample padding material protects it over the entire route.