Airbag control unit with part number 95910-F0260

What does the airbag control unit 95910-F0260 do?

The airbag control unit 95910-F0260 controls the SRS restraint system in the Hyundai. In a crash it evaluates the sensor data and triggers the appropriate airbags and seatbelt pretensioners within milliseconds.

It also monitors all connected components continuously and indicates faults via the airbag warning light.

After an accident the unit stores crash data and locks itself. This property is central to every repair.

Why does the control unit 95910-F0260 fail?

The most common cause is stored crash data after an accident, even if no airbag has deployed, which cannot be erased with an ordinary diagnostic tool. Other causes are ageing electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes, for example from a weak battery or a jump start.

Crash data record what happened in the accident situation. They remain in the memory until they are deliberately removed.

Ageing components lose reliability over time, and cold solder joints as well as moisture at plugs lead to contact problems. Voltage spikes additionally stress the electronics.

How can you tell that the 95910-F0260 is defective?

A defect shows up as the airbag warning light in the instrument cluster lighting up permanently or intermittently, and as an error message in the display. In addition, the diagnostic tool gets no connection to the control unit, or the fault memory cannot be cleared. In that case airbags and seatbelt pretensioners may fail to deploy in a crash.

The light is the warning signal that you should not ignore.

Which vehicles is the 95910-F0260 fitted in?

The control unit 95910-F0260 is fitted in these vehicles: Hyundai Elantra AD.

The following overview is used for assignment.

• Hyundai Elantra AD

Compare the part number on the label of the removed unit with this page. This only confirms that you have the correct unit in front of you. Have the fault memory read out beforehand, because only the result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 3X959-10100, 95910-28510, 95910-28520, 95910-2D500, 95910-3X100, 95910-A5150.

How does the repair of the 95910-F0260 work?

First you have the fault memory read out and enclose the log. Then disconnect the battery and only then remove the control unit. Next, create a repair order online and send the well-packed unit in. Airbag24 needs 3–4 working days in total for checking, repairing and testing.

Airbag24 examines the unit on the test bench, renews defective components, erases stored crash data and carries out a function test. The unit then goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-F0260 get to Airbag24?

You send the 95910-F0260 to Airbag24 as a parcel or book a UPS collection for an extra charge. The return after the repair is made by UPS.

Put the printed repair order into the parcel and pack the unit shock-proof.