Airbag control unit with part number 95910-F1400

What does the airbag control unit 95910-F1400 do?

The airbag control unit 95910-F1400 is the central unit of the restraint system (SRS) of Kia. It processes the crash sensor system and decides in a crash which airbags and seatbelt pretensioners are triggered.

It also checks the system for faults continuously. It indicates detected faults via the airbag warning light in the instrument cluster.

After an accident, the unit stores crash data and locks itself. At Airbag24, this lock is lifted by the repair.

Why does the control unit 95910-F1400 fail?

The most common cause is stored crash data, even if no airbag has triggered. A normal diagnostic tool cannot delete this data.

Other factors also play a role. Aged electronic components and cold solder joints can gradually impair the function.

Moisture and corrosion at the plug connections are also among the causes. Voltage spikes, for example from a weak battery or a jump-start, are also possible.

How can you tell that the 95910-F1400 is defective?

The airbag warning light lights up in the instrument cluster permanently or only intermittently. In addition, there is an error message in the instrument cluster and a fault memory that cannot be cleared.

The airbag warning light is the most important sign you will notice. If it comes on again and again after the ignition is switched on, the cause can be a problem in the control unit or its connection.

A diagnostic tool that cannot establish a connection to the control unit strengthens the suspicion. In an emergency, airbags and seatbelt pretensioners may not trigger.

Which vehicles is the 95910-F1400 fitted in?

The part number is assigned to specific vehicles. The control unit 95910-F1400 is fitted in these vehicles: Kia Sportage QL (2015-2021).

The vehicles for which this part number is recorded are listed here:

• Kia Sportage QL (2015-2021)

Before you remove the unit, have the fault memory read out. Then compare the part number on the label with your details, so that a plug or a cable is safely ruled out as the cause.

For the same vehicles, we also repair control units with the part numbers 95910-3W800, 95910-D9000, 95910-F1000, 95910-F1070, 959100Z200.

How does the repair of the 95910-F1400 work?

At Airbag24, inspection, repair and testing generally take 3–4 working days. Beforehand, you read out the fault memory and remove the control unit.

Enclose the read-out log and disconnect the battery. Then remove the control unit, create your repair order online and pack the unit well.

Airbag24 inspects the unit, replaces defective components, deletes stored crash data and carries out a function test. Afterwards your own unit is returned to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-F1400 get to Airbag24?

You send the unit as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

The printed repair order belongs in the parcel. Pack the control unit shock-proof.