Airbag control unit with part number 95910-F2150

What does the airbag control unit 95910-F2150 do?

The airbag control unit 95910-F2150 controls the restraint system (SRS) in the Hyundai. In the event of an impact it evaluates the sensor data, decides within milliseconds on the triggering of airbags and seatbelt pretensioners, and monitors the system continuously.

In everyday use it shows faults via the airbag warning light in the instrument cluster. This display is the direct way for you to notice a disturbance.

After an accident the unit secures the crash data and is locked afterwards.

Why does the control unit 95910-F2150 fail?

The most common cause is the crash data after an accident, even if no airbag was deployed. Other possible causes are ageing components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

Crash data stays in the unit, and a normal diagnostic tool cannot erase it. Airbag24 takes care of the erasure during the repair.

Ageing components lose reliability over the years. Solder joints can give way with temperature changes, and moisture with corrosion harms the plug connections. Voltage spikes, for example from a weak battery or jump-starting, are a further trigger.

How can you tell that the 95910-F2150 is defective?

A defect shows itself through an airbag warning light that stays on permanently or intermittently, through an error message in the instrument cluster, through a diagnostic tool without a connection, and through a fault memory that cannot be cleared. In an emergency, airbags and seatbelt pretensioners may then not deploy.

The airbag warning light remains the most important sign. As soon as it lights up, the control unit has detected a deviation, and the restraint system may be limited. A look at the log will show clearly whether the unit is affected.

Take this warning seriously and have the system checked.

Which vehicles is the 95910-F2150 fitted in?

The airbag control unit 95910-F2150 is fitted in these vehicles: Hyundai Elantra AD.

Here you can see the assigned vehicles:

• Hyundai Elantra AD

Comparing the part number of the removed unit with this page only confirms the identity of the unit. The fault memory shows whether it is defective. Have it read out beforehand, because it also shows whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 3X959-10100, 95910-28510, 95910-28520, 95910-2D500, 95910-3X100, 95910-A5150.

How does the repair of the 95910-F2150 work?

First have the fault memory read out and attach the log, then disconnect the battery and remove the control unit. Next create the repair order online and send in the well-packed unit. Processing at Airbag24 usually takes 3–4 working days.

For safety reasons this sequence is binding.

At Airbag24 the unit is checked, defective components are repaired, the crash data is erased, and a function test concludes the work. The unit then returns to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-F2150 get to Airbag24?

You send the unit to Airbag24 as a parcel, or you book a UPS collection for an extra charge. Returns after the repair go by UPS.

The printed repair order goes into the parcel with the unit. Pack the control unit shock-proof.